
Basic settings en
37
To access the basic settings:
The hob must be off.
1. Switch on the hob.
2. Within ten seconds, touch and hold the t symbol for
approximately four seconds.
The first four displays provide product information.
Touch the settings area to view the individual
displays.
3. Touching the t symbol again takes you to the basic
settings.
™‚ and ‹ light up as a preset in the displays.
4. Touch the t symbol repeatedly until the required
function is displayed.
™‚„
Configuring activation of the flexible cooking zone
‹ As two independent hotplates.*
‚ As a single hotplate.
™‚…
Connecting the wireless temperature sensor to the hob
‹ Connected correctly
‚ Not connected correctly: Transmission error.
ƒ Not connected correctly: Temperature sensor fault.
™‚ˆ
Setting air recirculation mode or air extraction mode
‹ Air recirculation mode has been set.*
‚ Air extraction mode has been set.
™‚‰
Setting automatic start
‹ Switched off.
‚ Switched on: Automatic mode with sensor control*
ƒ Switched on: The ventilation system starts at a fixed fan setting.
™‚Š
Setting the sensor sensitivity for the ventilation system
‚ Lowest sensor sensitivity setting.
ƒ Medium sensor sensitivity setting.*
„ Highest sensor sensitivity setting.
™ƒ‹
Setting the run-on
‹ Switched off.
‚ Switched on: Automatic function with sensor-controlled run-on.
ƒ Switched on: The ventilation system runs in air extraction mode for approx. 6 minutes and in air recirculation mode for approx.
30 minutes at fan setting ‚ and automatically switches off once this time has elapsed.*
™‹
Restoring the factory settings
‹ Individual settings.*
‚ Restoring the factory settings.
Display Function
* Factory settings
Product information Display screen
After-sales service index (ASSI)
‹‚
Production number
”š
Production number 1
І.
Production number 2
‹.†
Comentarios a estos manuales