Bosch CS 150 RC Manual de instrucciones descargar pdf (Pagina 31)

Praesideo PRS-CSM / PRS-CSRM / PRS-CSKPM en | 31

Bosch Security Systems B.V.

IUI PRS-CS(R)(KP)M | V1.0 | 2013.12

Installation and User Instructions

3.3.1 Connecting the PRS-CSKPM to

other modules

To connect a keypad module to an other module:

1 Remove the screws (A) of each module and slide the

top cover (B) off (see figure 3.8).

Make sure that you keep the screws (A) for later use.

figure 3.8: Module cover removal

2 Remove the cable entry knock-outs (C) for the

grommets in the modules (see figure 3.9). This

depends on the way you want to position the

modules (stacked, see figure 3.10 or next to each

other, see figure 3.12).

3 Put the grommet (D) on the flatcables (E).

4 Connect the flatcable to the PCB.

figure 3.9: Knock-out removal

5 Guide the flatcable to the other module (see figure

3.10 or figure 3.12) and insert the grommet into the

knock-out hole.

6 Connect the flatcable to the other PCB.

figure 3.10: Flatcable guidance (stacked modules)

7 Put the upper module on top of the lower module

(see figure 3.11).

Slide the upper module into the spring clamp (F)

8 Place and tighten the screws (A)

Use the screws of the cover that you removed.

9 Install the cover on the upper module.

figure 3.11: Module stacking

(2x)

X6 X5

(2x)

1 2 ... 26 27 28 29 30 31 32 33 34

Sin comentarios

Bosch CS 150 RC Manual de instrucciones Pagina 31