Bosch LTC 8016/90 Manual de usuario descargar pdf (Pagina 3)

Accessory Packages for the Allegiant | 3

interface cable for data/power between unit and main

Allegiant CPU bay supplied. Not applicable to the LTC 8100,

LTC 8200, and the LTC 8300 Series systems.

Electrical

Operating Voltage 12 VAC (supplied by main CPU bay)

Power 3 W

Indicators

•

Power

LED

•

Code

LED

Connectors

Input One (1), 9-pin Sub D connector for data/power

Outputs Sixteen, 6-contact removable screw terminal blocks

for code output. Maximum transmission distance is

1.5 km (5000 ft) using 1 mm

(18 AWG) shielded-

twisted pair (Belden 8760 or equivalent).

Mechanical

Construction/

Finish

Charcoal colored metal enclosure

Dimensions

(W x D x H)

445 x 318 x 89 mm (17.5 x 12.5 x 3.5 in.)

Integral mounting flanges for EIA 48 cm (19 in.) rack

Weight 1.8 kg (4 lb)

LTC 8768/00 Signal Distribution Unit

Same features and specifications as the LTC 8568/00

except that it contains twice the number of output

connectors which provide 64 separate outputs for driving

up to 512 remote devices. Not applicable to the LTC 8100,

LTC 8200, and the LTC 8300 Series systems.

LTC 8540/00 Alarm Interface Unit

Unit accepts up to 64 contact closures or logic level inputs

from remote sensing devices such as door contacts, PIRs,

etc. and then reports the “alarm” information to the main

Allegiant CPU bay. Alarm inputs may be configured in

groups of 32 to accept either normally open or normally

closed contacts. Unit also contains eight relay outputs that

activate automatically upon alarm conditions. A two meter

(6 ft) interface cable for data/power between unit and main

CPU bay is supplied. Not applicable to the LTC 8100,

LTC 8200, and the LTC 8300 Series systems.

Electrical

Operating Voltage 12 VAC or 12 VDC

(12 VAC is supplied by main CPU bay)

Power 8 W

Indicators

Power LED

Alarm LED; audible tone

Connectors

Alarm Inputs Sixty-four (64); twenty 6-contact removable screw

terminal blocks

Alarm Outputs Eight (8) relay outputs (100 VDC, 0.5 A, 10 W); four

(4), 6-contact removable screw terminal block.

Data/Power One 9-pin Sub D connector

Mechanical

Construction/

Finish

Charcoal colored metal enclosure

Dimensions

(W x D x H)

445 x 318 x 89 mm (17.5 x 12.5 x 3.5 in.)

Integral mounting flanges for EIA 48 cm (19 in.) rack

Weight 1.8 kg (4 lb)

AutoDome and AutoDome Easy IISeries

The AutoDome

and the AutoDome Easy II Series of cameras

integrates high-speed panning and tilting, 360-degree

continuous rotation, pre-positions, etc. in a small, easy-to-

install lightweight package. These PTZ models are available

with various mounting and configuration options for use in

both internal and external environments.

Refer to the AutoDome and the AutoDome Easy II Series

datasheets for complete specifications.

LTC 8560, LTC 8561, LTC 8562, LTC 8563, LTC 8564, and

LTC 8566 Series Receiver/Drivers

These series of on-site receiver/drivers are designed to

receive Bi-Phase control code and convert this data into

signals for controlling conventional pan/tilt, zoom lenses,

and auxiliary functions. Supplied in an environmentally

rated enclosure, these series of receiver/drivers are

available in both basic and full-featured models. Refer to the

chart below for specific model selection based on desired

operating voltages and features:

Model Features Input Voltage P/T Output Voltage

LTC 8560/60 Basic 120 VAC 120 VAC

LTC 8560/50 Basic 230 VAC 230 VAC

LTC 8561/60 Full 120 VAC 120 VAC

LTC 8561/50 Full 230 VAC 230 VAC

LTC 8562/60 Basic 120 VAC 24 VAC

LTC 8562/50 Basic 230 VAC 24 VAC

LTC 8563/20 Basic 24 VAC 24 VAC

LTC 8564/20 Full 24 VAC 24 VAC

LTC 8566/60 Full 120 VAC 24 VAC

LTC 8566/50 Full 230 VAC 24 VAC

Refer to the LTC 8560 Series and/or LTC 8561 Series datasheets for com-

plete specifications.

LTC 8569, LTC 8570, LTC 8571, LTC 8572 Series Code

Merger Units

Control code merger and line driver units used to combine

Allegiant Bi-Phase control code from two (up to four with

LTC 8570 and LTC 8572 versions) systems for

communicating to AutoDome Series cameras, receiver/

drivers, switcher/followers, and Allegiant Satellite systems.

The LTC 8569, LTC 8570 Series provides 32 separate

www.boschsecurity.com

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Bosch LTC 8016/90 Manual de usuario Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch LTC 8016/90