Bosch LTC 8016/90 Manual de usuario descargar pdf (Pagina 7)

Accessory Packages for the Allegiant | 7

operating AutoDome cameras. Either “star” or “daisy chain”

wiring configurations can be used from each of its 16

outputs. Using daisy chain, each output is capable of driving

8 receiver/driver loads at up to 1.5 km (5000 ft.) away using

1 mm

(18 AWG) shielded-twisted pair (Belden 8760 or

equivalent).

Refer to the LTC 8786 series datasheet for complete

specifications.

LTC 8016/90 Bilinx™ Data Interface Unit

The LTC 8016/90 Allegiant Bilinx Data Interface unit is an

accessory used for communicating over-the-coax, with up

to 16 Bilinx-capable AutoDome

and/or Dinion™ Series

cameras. Compatible with all seven Allegiant Series matrix

switcher/controllers, the LTC 8016 provides complete

control of pan/tilt/zoom, auxiliaries, and pre-position

functions of Bilinx enabled AutoDome Series cameras. In

addition, complete programming of Dinion Series cameras

and AutoDomes via their on-screen menus is supported.

Bilinx technology also supports camera-generated event

reporting to the Allegiant. This allows remote alarm inputs

and motion event data to be sent by the camera to the

Allegiant without the need for additional wiring between

the camera site and the main control location.

In addition, the LTC 8016 is designed so that other Bi-Phase

code generating products, like Bosch Digital Videos

Recorders, can be used with the unit for control of PTZ

functions and camera menu access over the video cable.

The LTC 8016 is supplied in an enclosure compatible with

mounting in an EIA 48 cm (19 in.) rack, requiring only a 1-U

rack height. To support large systems, up to 31 units can be

cascaded, comprising up to 496 Bilinx-compatible cameras.

The LTC 8016 can also be used to transmit Bilinx

communications over a number of video transmission

systems. Example devices include fiber optic links and

external balun devices that use CAT5 twisted pair cables for

video communication.

Refer to the LTC 8016/90 datasheet for complete

specifications.

LTC 8808/00 Video Interconnect Panel

The LTC 8808/00 Video Interconnect panel provides the

LTC 8200, LTC 8300 Series, LTC 8600 Series, and LTC 8800

Series systems the ability of looping up to 32 video inputs

per panel. This 'patch' panel contains 32 BNC connectors

on its front panel for external video connections and two

16-contact ribbon connectors on its rear panel. Two, 2-

meter (6-ft) 16‑conductor video grade ribbon cables are

included for interfacing the patch panel to the video looping

connectors on the rear panel of the LTC 8200, LTC 8300

Series, LTC 8600 Series, and LTC 8800 Series equipment

bays.

Mechanical

Construction/Fin-

ish

Charcoal painted metal

Size One standard EIA 48 cm (19 in.) rack unit high and

one unit wide. Integral mounting flange design.

Weight 0.8 kg (1.8 lb)

LTC 8807/00 Video Interconnect Panel

The LTC 8807/00 Video Interconnect Panel is identical to

the LTC 8808/00 described above, except that it does not

include the two video ribbon cables. This video

interconnect panel is intended for use with products that

are supplied with video ribbon cables, such as the

LTC 8016/90 Bilinx Data Interface unit.

For example, the ribbon cables from up to two LTC 8016

units can be converted into 32 standard female BNC

connectors using this interface panel. This configuration is

necessary when the LTC 8016 unit will be separated from

the control unit beyond a 2 m (6 ft) distance.

LTC 8809 Series Video Ribbon Cables

The LTC 8809 series are 16-channel video ribbon cables

that are used to provide connections between certain

devices. Specifically designed for the transport of 75 Ohm

video signals, these cables are available in three different

lengths:

Model Number Length

LTC 8809/00 2 m (6 ft)

LTC 8809/01 1 m (3 ft)

LTC 8809/02 3.2 m (10.5 ft)

Each cable contains a 34-pin connector at each end that is

designed to ‘lock’ into the corresponding connector found

on the rear panels of the Allegiant LTC 8800 and LTC 8900

series matrix switchers. In addition, these cables are

supplied with certain other products, including the

LTC 8808/00 Video Interconnect Panel and the

LTC 8016/90 Bilinx Data Interface unit.

LTC 8506/00 Allegiant Console Cable

The LTC 8506/00 is an RS-232 grade cable with 9-pin, Sub

D-connectors on each end that is used to connect an

Allegiant’s system’s Console port to a standard PC Com

port. This cable is included in the Allegiant LTC 8059 Master

Control Software and the LTC 8850 Allegiant GUI packages.

Length: 3 m (10 ft), approximately.

www.boschsecurity.com

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Bosch LTC 8016/90 Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch LTC 8016/90