Bosch LTC 8016/90 Manual de usuario descargar pdf (Pagina 5)

Accessory Packages for the Allegiant | 5

Model No. Rated Voltage Voltage Range Power

Outputs Four (4), 9-pin Sub D connectors for RS-232 interface to

up to four external devices

AC Input 3-wire power cord with grounded plug; 1.8 m (6 ft) long

Mechanical

Construction/

Finish

Steel chassis with sheet metal cover and plas-

tic bezel. Charcoal colored case.

Dimensions

(W x D x H)

223 x 280 x 40 mm

(8.77 x 11 x 1.59 in.)

Weight 1.9 kg (4.3 lb)

Optional Rack Mount Kit LTC 9101/00 (Holds 1 or 2 units)

LTC 8713 Series Alarm Port Expander

The LTC 8713 Series interfaces to a LTC 8500, LTC 8600,

LTC 8800, or LTC 8900 Series alarm port to permit

additional LTC 8540/00 Alarm Interface units to be

connected to the system. A single LTC 8713 series alarm

port expander supports up to four LTC 8540/00 alarm

interface units. This provides the capability for up to 256

alarm input points. Multiple LTC 8713 units may be

combined to provide up to 1024 alarm input points using

up to sixteen LTC 8540/00 units. The actual number of units

that can be used in a system depends upon the model of

the Allegiant system being used. System interconnect cable

is included. A separate 12 VAC or DC, 8 W power supply is

required for each LTC 8540/00.

Alarm Capacities

Allegiant Model

No.

Maximum No.

of Alarms

Maximum No. of

LTC 8713

Maximum No. of

LTC 8540/00

LTC 8500 128 1 2

LTC 8600 512 3 8

LTC 8800 1024 5 16

LTC 8900 1024 5 16

Electrical

Model No. Rated Voltage Voltage Range Power

LTC 8713/60 120 VAC, 50/60 Hz 108 to 132 10 W

LTC 8713/50 230 VAC, 50/60 Hz 198 to 264 10 W

Indicators Power and data transmission activity displayed using

LEDs.

Connectors

Inputs One (1), 9-pin Sub D connector; provides RS-232 inter-

face to main Allegiant bay. Two-meter (6-ft) interconnect

cable to main bay supplied.

Outputs Four (4), non-powered, 9-pin Sub D connectors for

RS‑232 interface to up to four expanded LTC 8540/00

units. Data cables supplied with LTC 8540/00 are used

to connect alarm interfaces to port expander. A separate

12 VAC or DC, 8 W power supply is required for each

LTC 8540/00.

AC Input 3-wire power cord with grounded plug; 1.8 m (6 ft) long

Mechanical

Construction/

Finish

Steel chassis with sheet metal cover and plastic

bezel. Charcoal colored case.

Dimensions

(W x D x H)

223 x 280 x 40 mm

(8.77 x 11 x 1.59 in.)

Weight 1.9 kg (4.3 lb)

Optional Rack Mount Kit LTC 9101/00 (Holds 1 or 2 units)

LTC 8714 Series and LTC 8715 Series Keyboard Port

Expanders

The LTC 8714 Series and the LTC 8715 Series are port

expander accessory units used to provide additional

keyboard capacity for LTC 8600, LTC 8800, or LTC 8900

Series Allegiant systems. A single LTC 8714 Series unit can

be used to interface up to eight keyboards with an allegiant

system. A single LTC 8715 Series is used to interface up to

four LTC 8714 Series expanders in a system. Multiple

LTC 8715 Series expanders can be used along with multiple

LTC 8714 Series expanders to provide up to 64 keyboards

in a system. The actual number of units that can be used in

a system depends upon the model of the Allegiant system.

Allegiant System Capacities

Allegiant Model

No.

Maximum No. of

Keyboards

Maximum No. of

LTC 8714

Maximum No. of

LTC 8715

LTC 8600 16 1 0

LTC 8800 32 3 1

LTC 8900 64 7 3

The above table assumes eight system keyboards are

connected directly into the Allegiant CPU bay keyboard

ports. An LTC 8557 Series keyboard hookup kit is required

for each expanded keyboard. LTC 8714 and LTC 8715 port

expanders can only be used on LTC 8600, LTC 8800, and

LTC 8900 systems containing CPU software version 6.2 or

later.

Electrical

Model No. Rated Voltage Voltage Range Power

LTC 8714/60 120 VAC, 50/60 Hz 108 to 132 10 W

LTC 8715/60 120 VAC, 50/60 Hz 108 to 132 10 W

LTC 8714/50 230 VAC, 50/60 Hz 198 to 264 10 W

LTC 8715/50 230 VAC, 50/60 Hz 198 to 264 10 W

Indicators Power and data transmission activity displayed using

LEDs

LTC 8714 Series Connectors

Interface Data Port: One (1), 9-pin Sub D connector

provides data interface to COM 2 port of main Allegiant CPU

bay or to expansion port of LTC 8715 Series. Two-meter (6-

ft) interconnect cable supplied. Keyboard Data Ports: Eight

(8), 6-contact non-powered Allegiant series keyboard cable

connectors. An LTC 8557 Series keyboard hookup kits are

www.boschsecurity.com

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Bosch LTC 8016/90 Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch LTC 8016/90