Bosch NDN-921 Manual de usuario descargar pdf (Pagina 113)

FlexiDomeHD 720p Camera Operation via the browser | en 113

Bosch Security Systems Installation and Operation Manual AR18-10-B013 | v1.52 | 2010.12

10.1.3 Digital I/O

Depending on the configuration of the unit, the alarm input and

the relay output are displayed next to the camera image. The

alarm symbol is for information and indicates the input status

of the alarm input: Active 1 = Symbol lights, Active 0 = Symbol

not lit. The relay on the camera allows the operation of a device

(for example, a light or a door opener).

– To operate, click the relay symbol. The symbol is red when

the relay is activated.

10.1.4 System Log / Event Log

The System Log field contains information about the operating

status of the camera and the connection. These messages can

be saved automatically in a file. Events such as the triggering or

end of alarms are shown in the Event Log field. These messages

can be saved automatically in a file.To delete the entries, click

the icon in the top right-hand corner of the relevant field.

10.1.5 Saving snapshots

Individual images from the video sequence that is currently

being shown on the Livepage can be saved in JPEG format on

the computer's hard drive.

Motion flag set on media item

Discovery of storage not completed

If the information about recorded video is not

cached, a discovery procedure is started to find

all recorded video. During this time, the discovery

symbol is shown. While discovery is executed,

gaps might be shown in places which the

discovery has not yet reached. The gap is

automatically replaced by the true video, when

the correct information is available.

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 131 132

Sin comentarios

Bosch NDN-921 Manual de usuario Pagina 113