Bosch NDN-921 Manual de usuario Pagina 35

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 132
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 34
FlexiDomeHD 720p Camera Installation | en 35
Bosch Security Systems Installation and Operation Manual AR18-10-B013 | v1.52 | 2010.12
5.6 Closing the unit
When the camera position is set and all adjustments have been
made, close the unit.
1. If necessary, remove the adjustment cap from the lens.
2. Place the inner liner in position aligning its fin with the
bracket on the base.
3. Place the dome onto the base and rotate until it clips into
place. (If necessary, clean its surface with a soft cloth.)
4. Place the sealing ring and the trim ring over the dome.
5. Align the tamper-resistant screws in the trim ring with the
threaded ends in the mounting base.
6. Use the supplied special screwdriver bit to tighten the
three tamper-resistant screws.
Vista de pagina 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 131 132

Comentarios a estos manuales

Sin comentarios