Bosch NDN-921 Manual de usuario descargar pdf (Pagina 73)

FlexiDomeHD 720p Camera Advanced Mode | en 73

Bosch Security Systems Installation and Operation Manual AR18-10-B013 | v1.52 | 2010.12

iSCSI Media

If an iSCSI system is selected as the storage medium, a

connection to the desired iSCSI system is needed to set the

configuration parameters.

The storage system selected must be available on the network

and completely set up. Amongst other things, it must have an IP

address and be divided into logical drives (LUN).

1. Enter the IP address of the required iSCSI destination in

the iSCSI IP address field.

2. If the iSCSI destination is password protected, enter this

into the Password field.

3. Click the Read button. The connection to the IP address is

established. The Storage overview field displays the

logical drives.

Local Media

The supported local recording media is displayed in the storage

overview field.

Activating and Configuring Storage Media

The storage overview displays the available storage media.

Select individual media or iSCSI drives and transfer these to the

Managed storage media list. Activate the storage media in this

list and configure them for storage.

Note:

Each storage medium can only be associated with one user. If a

storage medium is already being used by another user,

decouple the user and connect the drive to the camera. Before

decoupling, make absolutely sure that the previous user no

longer needs the storage medium.

1. In the Recording media section, click the iSCSI Media or

Local Media tab to display the applicable storage media in

the overview.

2. In the Storage overview section, double-click the required

storage medium, an iSCSI LUN or one of the other

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 131 132

Sin comentarios

Bosch NDN-921 Manual de usuario Pagina 73