Bosch DS7200V2-EXP Guía de usuario descargar pdf (Pagina 101)

DS7200V2-EXP | Expert Programming Guide | 4. Control Panel Programming EN | 101

Bosch Security Systems | 8/04 | 4998153891C

No EOL Resistor, Zone Doubling, or Tamper-wired Configuration

• Address: See Table 17 on page 88

• Default: See Table 17 on page 88

• Selections: 0 to 15

Enter This Data Digit to Select Options

Reporting Enable, Trouble Response Options 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No Alarm or Trouble Reports

•

Alarm Reports Enabled

• • • • • • • •

Normally Open Sensor Contacts

• • • • • • • •

Trouble Response on Off-Normal

• • • • • • • •

Alarm Restoral Reports Enabled

• • • • • • • •

The Reporting Enable/Trouble Response options are modified when the input zone is configured for no EOL

resistor, zone doubling, or tamper-wired operation. See Zone Wiring Configuration on page 89 for more information.

• Alarm Reports Enabled: If this option is enabled, the system generates Alarm reports.

• Normally Open Sensor Contacts: Enable this option when the sensor contacts are Normally Open and

shorted contacts create a fault. Disable this option when the contacts are Normally Closed and an open

condition creates a fault.

Most RF zones require the zone function to be configured with Normally Open sensor contacts

disabled.

• Trouble Response on Off-Normal: If this option is enabled, an off-normal condition generates a Trouble

response. The trouble response for non-24-hour zones and 24-hour burglary Zone Function types occurs only

when the zones are disarmed. When armed, any zone fault generates an alarm response. Other 24-hour zone

types (Tamper, Emergency, Panic and Invisible) always have trouble response as programmed.

• Alarm Restoral Reports Enabled: If this option is enabled, the system generates Alarm Restoral reports.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 155 156

Sin comentarios

Bosch DS7200V2-EXP Guía de usuario Pagina 101