Bosch SC8016 Guía de instalación descargar pdf (Pagina 42)

SC9000

ST150 SAFECOM Central Station Operation Manual

5.13. Automation : Alarm Event Windows

The ST150 incorporates a simple Pop-up Alarm Event Window instead of using a external Automation Software package

as the ST1000 is designed to use. As described earlier under the F3=System menu the “Enable Alarm Windows?” must

be set to “Y” to use this feature.

Alarm Event Windows give the system the ability to pop-up a 7 line x 35 character wide window of special instructions for

the Operator associated with each Radio Communicator Account Number. At the main login screen, which is pictured on

the front of this manual press “F7=Account” to access the Radio Account editor shown below.

When a event alarm occurs the Alarm Event Windows will show this customer information. The PC Audible Alarm will be

beeping .The windows will be flashing . The operator will press F10 to silence the alarm, print the event , and log it to the

hard drive file ”event text ”. No login will be required for this operation, but the operator must be a valid user as described

in the “F3=SYSTEM | F1=USER CODES” section. The operator will be prompted to enter his name during the

acknowledgement.

Note : In the illustration above. The System Screen heading was customized by adding the word “Safecom” to a plain text

file named “st150.nam” in the main route directory. Periodically the text log file “event.txt” should be backed-up and then deleted to

save on hard drive space.

1 2 ... 37 38 39 40 41 42 43 44

Sin comentarios

Bosch SC8016 Guía de instalación Pagina 42