Bosch FPA-1200-MPC Guía de usuario descargar pdf (Pagina 39)

Diagnostics

Diagnostics information and help materials for pinpointing problems in a network can be

found under menu item Diagnostics - Network. Information is provided on the following

topics:

– Routing table

Information concerning the accessibility of all nodes within the system network via the

respective interface.

– Ethernet ports

Information concerning different parameters and the status of the two Ethernet

interfaces available at the panel controller.

– Send ping command

Sending of a ping command to a specific IP address to check the availability of other

nodes in the network.

– Consistency check

The check performed determines whether the Ethernet configuration from FSP-5000-RPS

corresponds to the configuration entered at the panel controller. In the event of

discrepancies, a fault message is displayed.

– Ethernet redundancy

Information concerning the type of redundancy configuration (RSTP or dual-homing). In

the case of redundancy via RSTP, the RSTP parameters of the RSTP panel and those of

the root bridge are displayed.

Further information can be found in Network services, page 65.

7.3

Panel Controller Networking via Ethernet | en 39

Bosch Sicherheitssysteme GmbH User Guide 2013.07 | 3.0 | F.01U.258.929

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 99 100

Sin comentarios

Bosch FPA-1200-MPC Guía de usuario Pagina 39