search

Bosch FPA-1200-MPC Guía de usuario Pagina 41

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 100
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 40
Alarm
Notice!
Information on how to handle a fire alarm can be found in Fire alarm, page 47.
This chapter contains information about the following points:
– Types of alarm, page 41
– Entry delays, page 41
– Day and night mode, page 42
– Alarm message to the panel, page 43
Refer to theFire alarmchapter for the following topics:
– Acknowledging a message, page 47
– Switching off internal buzzer, page 47
– Switching external signaling devices on and off, page 48
– Resetting external signaling devices and transmission devices, page 48
– Triggering fire verification, page 48
– Resetting alarm message, page 50
– Bypassing detectors, page 50
Notice!
Depending on the configuration, the manner in which alarm displays are shown and handled
in this guide may differ from the guide on the system.
Types of alarm
On the panel controller, a distinction is made between the following types of alarm:
– Fire
– Heat (heat)
– Smoke
– Water
– Supervisory
Depending on the configuration, external transmission devices (e.g. fire department),
notification appliances (e.g. sirens and/or strobes) and fire protection systems (e.g. sprinkler
systems, fire doors) are activated.
Notice!
If an alarm delay is set for the detector triggering the alarm, the alarm signal is not
transmitted immediately and the message can be checked; see Entry delays, page 41.
Entry delays
To prevent false alarms, it is possible to delay the transmission of the first alarm signal. The
transmission device to the fire department is not activated in this case. During the delay, the
message can be checked to ensure it is correct.
The FSP-5000-RPS programming software can be used to program various strategies for
avoiding false alarms. These strategies are principally used in fire detectors but can also be
assigned to any other detector, depending on how it is configured.
The alarm delays that can be shown in the panel controller display are explained below.
9
9.1
9.2
Panel Controller Alarm | en 41
Bosch Sicherheitssysteme GmbH User Guide 2013.07 | 3.0 | F.01U.258.929
Vista de pagina 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 99 100

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Controles remotos Bosch FPA-1200-MPC
Controles remotos Bosch FPA-1200-MPC Manual de usuario   (4 paginas)
  • ETQ Vinothque Melnor OK International Best Mounting
  • Fisher & Paykel Cocinas Hitachi Arrays de discos ResMed Deshumidificadores Sears Lanzadores de nieve Shure Amplificadores de audio
  • Aeroneb Go Canon LASERBASE MF3110 Samsung UD55E-A Philips QC5000 Nikon D4S
  • Acer X193HQ Manual de usuario Pioneer DCS-333 Manual de usuario Casio XJ-A135U Guía de usuario ENERGY SISTEM BT Sport Manual de usuario Yamaha PSR-22 El manual del propietario