Bosch ICP-CC404 Especificaciones descargar pdf (Pagina 7)

ICP-CC404 | Quick Reference Guide | 3.0 Using the System

Bosch Security Systems, Inc. | 12/08 | F01U089402-02 7

3.14 Program STAY Mode 2 Zones

1. Enter the Installer Code or Master Code and

press [4 #] (for example, [1 2 3 4 4 #]).

2. Enter the zone number to automatically isolate,

and press [*].

3. Repeat Step 2 to program other zones.

4. Press [#] to exit.

3.15 Fault Analysis

1. Press and hold [5] until two beeps sound.

2. The zone indicators show the fault condition.

Refer to Table 6 on page 7.

3. Press [#] to exit.

Table 6: Fault Condition Indicators

Zone LED FAULT Condition

1 Battery low

2 Date/time reset

3 Sensor watch fail

4 Horn speaker fail

5 Telephone line fail

6 EEPROM fail

7 AUX Power Supply fail

8 Communication fail

3.16 Modem Call (Alarm Link)

Press and hold [6] until two beeps sound.

3.17 Reset Latching Outputs

Press and hold [7] until two beeps sound.

3.18 Set the Codepad ID/Buzzer Tone

1. Press and hold [8] until the desired buzzer tone

sounds.

2. Press [#] to exit.

3.19 Test Report

Press and hold [9] until two beeps sound.

3.20 Speaker Test

Press and hold [1] until two beeps sound.

The speaker sounds for 2 sec.

3.21 Bell Test

Press and hold [2] until two beeps sound.

The piezo siren sounds for 2 sec.

3.22 Strobe Test (Toggle On/Off)

1. To turn the strobe on, press and hold [3] until

three beeps sound.

2. To turn the strobe off, press and hold [3] until

two beeps sound.

3.23 Telco Arm Sequence (Call Forward

On)

1. Enter the Installer Code or Master Code and

press [3 #] (for example, [1 2 3 4 3 #]).

2. Enter [1 #].

3. Enter the Call Forward On sequence.

4. Press [#] to exit.

3.24 Telco Disarm Sequence (Call

Forward Off)

1. Enter the Installer Code or Master Code and

press [3 #] (for example, [1 2 3 4 3 #]).

2. Enter [2 #].

3. Enter the Call Forward Off sequence.

4. Press [#] to exit.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comentarios a estos manuales

Sin comentarios

Bosch ICP-CC404 Especificaciones Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch ICP-CC404