Bosch ICP-CC488 Especificaciones descargar pdf (Pagina 20)

ICP-CC488 | Quick Reference Guide | 2.0 Programming Parameters EN | 20

Bosch Security Systems, Inc. | 12/08 | F01U089458-02

2.14.12 Auto Disarming Time

Location

486 to 489

Location Default

Hour of the day (tens digit) 486 0

Hour of the day (units digit) 487 0

Minute of the day (tens digit) 488 0

Minute of the day (units digit) 489 0

2.14.13 Kiss-Off Wait Time

Location

490

Default

Increments of 500 ms (500 ms – 8 sec)

2.14.14 Speaker Beep Volume

Location

491

Default

No Beeps

Loudest Beeps

2.15 Options Programming

2.15.1 System Options 1

Location

492

1 Bosch Security Systems smart lockout allowed

2 Horn speaker monitor

4 Strobe indication for radio arm/disarm

8 Assign button 4 on transmitter to operate STAY

Mode 1

2.15.2 System Options 2

Location

493

Default

1 Codepad panic to be silent

2 Codepad fire to be silent

4 Codepad medical to be silent

8 Access denied (code retries) to be silent

2.15.3 System Options 3

Location

494

1 AC fail after 1 hr (Disabled – after 2 min)

2 Ignore AC fail

4 Pulse count handover allowed

8 Handover delay to be sequential

2.15.4 System Options 4

Location

495

Default

1 Panel to power up disarmed (if power reset)

2 Arm/disarm tracking on power up

4 Internal crystal to keep time

8 Night arm station or RE005 installed

2.15.5 Consumer Options 1

Location

496

Default

1 Test reports only when armed

2 Test report after siren reset

4 Auto arm in STAY Mode 1

8 STAY indicator to display day alarm status

2.15.6 Consumer Options 2

Location

497

1 Codepad displays extinguish after 60 sec

2 Single button arming allowed (AWAY/STAY Modes 1

and 2)

4 Single button disarming allowed (STAY Modes 1 and

8 Alarm memory reset on disarm

2.15.7 Consumer Options 3

Location

498

1 Codepad fault beeps allowed

2 Use digit 3 for codepad duress alarm (instead of

digit 9)

4 Alarms activate sirens and strobe outputs in STAY

Modes 1 and 2

8 Zone tamper alarms to be silent

2.15.8 Radio Input Options

Location

499

Default

1 DSRF Receiver

2 Latching keyswitch input

3 Momentary keyswitch input

4 Reserved

2.15.9 Partitioning Options 1

Location

500

Default

1 First to Open/Last to Close reporting armed

2 Area 1 codepad connected to data terminal

4 Reset sirens from any area allowed

8 Master codepad to display AUX indicator when online

2.15.10 Partitioning Options 2

Location

501

Default

1 Lock area 1 to Receiver 1 and lock area 2 to Receiver 2

2 User codes allowed to arm/disarm both areas at same

time (Code [0][#])

4 Reserved

8 Reserved

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Comentarios a estos manuales

Sin comentarios

Bosch ICP-CC488 Especificaciones Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch ICP-CC488