Bosch ISW-BIT1-HAX WLSN INSTALLATION Especificaciones descargar pdf (Pagina 36)

wLSN | Reference Guide | 9.0 wLSN Inertia Detector

36 Bosch Security Systems, Inc. | 3/07 | F01U009440-01

9.0 wLSN Inertia Detector

(ISW-BIN1-S135X)

The wLSN Inertia Detector is a vibration detector combined with a

wireless transceiver used for monitoring doors or windows.

Features include:

• An internal reed switch for use with an external magnet

assembly

• An inertia element for detecting shock

• A cover and wall tamper switch

• A multipurpose LED for Test, RFSS, and Discovery Modes

Table 15: Inertia Detector Specifications

Maximum Distance

Between Detector

and Magnet

≤12,7 mm (1/2 in.)

The magnet can be placed on either side of the

detector.

Power/Voltage 2 AA batteries, 1.5 V alkaline

Sensor Adjustment

Adjust the position of the sensor element, so the arrow

always points up by removing and replacing the

element to accommodate the possible placement

positions (Figure 12 on page 37).

Route the wiring from the sensor element so it does

not make contact with the tamper spring (Figure 13 on

page 37).

Cover and Wall

Tamper Switch

Transmits a tamper signal when the cover is removed

from its base or the unit is pulled away from the wall.

EN50131-1 Security Grade 2, Environmental Class II

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

Sin comentarios

Bosch ISW-BIT1-HAX WLSN INSTALLATION Especificaciones Pagina 36