Bosch ISW-BIT1-HAX WLSN INSTALLATION Especificaciones descargar pdf (Pagina 58)

wLSN | Reference Guide | 14.0 wLSN Glassbreak Detector

58 Bosch Security Systems, Inc. | 3/07 | F01U009440-01

14.5.2 Returning the Glassbreak Detector to an Undiscovered

State

If the wall tamper tab is removed and you must return the detector

to an undiscovered state:

1. Remove the batteries from the detector.

2. Place the detector on a flat surface to depress the wall

tamper switch. Refer to Figure 22 on page 57.

3. Press and hold the cover tamper switch.

Refer to Figure 22 on page 57.

4. While both tamper switches are depressed, reinsert the

batteries.

The RFSS Mode LED turns on.

Refer to Figure 19 on page 51 for the location of the RFSS

Mode LED.

5. Release the cover tamper switch within five sec after the

RFSS Mode LED turns on.

The detector returns to an undiscovered state.

1 2 ... 53 54 55 56 57 58 59 60

Sin comentarios

Bosch ISW-BIT1-HAX WLSN INSTALLATION Especificaciones Pagina 58