Bosch K2200 Series Guía de usuario descargar pdf (Pagina 26)

K2200 Series | User Guide | 4.0 Key Administration/ Access Control EN | 26

Bosch Security Systems | 7/03 | 17376 v1.1 / 47491C

Table 13: Time Period Examples

Start Time End Time Days

08:45 17:30 MTWTF--H

08:45 13:30 -----S-H

18:00 23:59 MTWTF--H

00:00 06:00 -TWTFS--

00:00 00:00 --------

09:00 17:00 MTWTF--H

00:00 23:59 -----SS-

1. A group of people requires access to an area

during working hours only. In this case working

hours are 9:00am to 5:00pm Monday to Friday

and 9:00am to 1:00pm Saturday. They will not

be allowed access on public holidays if these fall

on weekdays. Notice that some extra time is

allowed at the start and end of the period to

allow people to arrive early and leave late.

Period

1: 1

08:45 17:30 MTWTF--H

2: 2

08:45 13:30 -----S-H

3: 0

2. A public entrance door needs to be unlocked

during office hours, but not on public holidays.

Unlike the example 1, there is no 'spare' time at

the start and end of the period.

Period

1: 7

09:00 12:00 MTWTF--H

2: 0

3: 0

3. Shift workers need access to an area between

6:00pm and 6:00am Monday to Friday.

Period

1: 3

18:00 23:59 MTWTF---

2: 4

00:00 06:00 -TWTFS--

3: 0

Note:

In this case, because they work over midnight, they need

access on the following day, i.e. they arrive for work on

Friday evening but leave on Saturday morning. You

need to use caution when restricting access on public

holidays in these cases. A 'normal' working day may

start or finish on a holiday.

4.3.3 The PR Command

1. Present an editor key to the faceplate reader.

2. Enter the password and press [ENT], if required.

3. You will now see the CMD prompt.

4. Type [P][R] and press [ENT].

CMD PR_

5. Use the up and down arrow keys or FastFind (*)

to select the time period you want to change.

P1 START 00-00

6. Period Start - Using the 24-hour clock, enter the

start time of the period and press [ENT].

P1 START 00-00

Press [NXT] to go to the next field.

7. Days of the Week - This is an option field. To

make the time period active on a particular day

of the week, type a number as follows:

1 Mon, 2 Tue, 3 Wed, 4 Thu, 5 Fri, 6 Sat, 7 Sun,

8 Hol

P1 --------

When you press a number, the initial letter of the

day will appear. To deselect a day press its

number again, a dash will appear at that day.

The holiday option 8 indicates that this time

period will not be active on a system holiday.

Press [ESC] to return to the CMD prompt.

4.3.4 Creating a Time Profile – The T Command

Before creating a time profile, ensure that the time

periods you require have already been set, see Section

4.3.3 The PR Command.

Using the T Command

1. Present an editor key to the faceplate reader.

2. Enter the password and press [ENT], if required.

3. You will now see the CMD prompt.

4. Type [T] and press [ENT].

CMD T_

5. Use the up and down arrow keys or FastFind (*)

to select the time profile you want to change.

TP 1 ON Y

6. Time Profile Status - See the description in see

Section 4.3.1 How Time Profiles Work, to

understand the significance of this setting.

TP 1 ON N

Type [Y] to switch the time profile ON, Type [N]

to switch the time profile OFF.

Press [ENT].

Press [NXT] to go to the next field.

7. First Time Period - Enter the first time period

number (0-32). Enter [0] if you do not need this

time period.

Press [ENT].

TP 1 PER 1 0

Press [NXT] to go to the next field.

8. Second Time Period - Enter the second time

period number (0-32). Enter [0] if you do not

need this time period.

Press [ENT].

TP 1 PER 2 0

Press [NXT] to go to the next field.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 61 62

Comentarios a estos manuales

Sin comentarios

Bosch K2200 Series Guía de usuario Pagina 26

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch K2200 Series