Bosch CC880/LP880, SC8016 Especificaciones descargar pdf (Pagina 8)

CC880/LP880, SC8016 | Quick Reference Guide | 4. Programming Commands EN | 8

Bosch Security Systems | 6/04 | 4998152461B

4.1 Arming the System (On)

4.1.1 AWAY Mode

Press and hold the [#] key until two beeps are heard.

Enter your code followed by the [#] key (for

example, [2 5 8 0 #]).

4.1.2 STAY Mode 1

Press and hold the [*] key until two beeps are heard.

Enter your code followed by the [*] key (for example,

[2 5 8 0 *]).

4.1.3 STAY Mode 2

Press and hold the [0] key until two beeps are heard.

4.1.4 Arm All Areas in AWAY Mode

(Partitioning)

Enter your code followed by [0] and then the [#] key

(for example, [2 5 8 0 *]).

Use this code to arm all areas that the code is

assigned simultaneously to in AWAY Mode without

arming each area individually.

4.2 Disarming the System (Off)

4.2.1 AWAY Mode

Enter your code followed by the [#] key (for

example, [2 5 8 0 #]).

4.2.2 STAY Mode 1

Press and hold the [*] key until two beeps are heard

(only if no alarm).

Enter your code followed by the [#] key (for

example, [2 5 8 0 #]).

4.2.3 STAY Mode 2

Press the [0] key until two beeps are heard (only if no

alarm).

Enter your code followed by the [#] key (for

example, [2 5 8 0 #]).

4.2.4 Disarm All Areas (Partitioning)

Enter your code followed by [0] and then the [#] key

(for example, [2 5 8 0 *]).

Use this code to disarm all areas that the code is

assigned simultaneously without disarming each area

individually.

4.3 Isolating Zones

4.3.1 Standard Isolating

1. Press the [*] key twice.

2. Enter the zone number you want isolated

followed by the [*] key.

Repeat Step 2 if more than one zone must be

isolated.

3. Press the [#] key to exit when finished.

4.3.2 Code to Isolate

1. Press the [*] key once.

2. Enter your user code.

3. Enter the zone number you want isolated

followed by the [*] key.

Repeat Step 2 if more than one zone must be

isolated.

4. Press the [#] key to exit when finished.

4.3.3 Set First Test Report

1. Enter the four character Installer Code followed

by [2] and the [#] key (for example,

[1 2 3 4 2 #]).

2. Enter the number of days (0 to 99) to wait until

the first test report followed by the [#] key.

4.3.4 Event Memory Recall

Enter the four character Installer Code or Master

Code followed by [3] and the [#] key (for example,

[1 2 3 4 8 #]).

The last 40 events (non-partitioned) or last ten events

(partitioned) are displayed in reverse order (for

example, most recent to least recent).

4.3.5 Walk Test Mode

1. Enter the four character Installer Code or Master

Code followed by [4] and the [#] key (for

example, [1 2 3 4 4 #]).

2. Test each zone as required.

3. Press the [#] key to exit.

4.3.6 Satellite Siren Service Mode

Enter the Installer Code followed by [5] and the [#]

key (for example, [1 2 3 4 5 #]).

4.3.7 Telephone Monitor Mode (Toggle

On/Off)

1. Enter the four character Installer Code followed

by [7] and the [#] key (for example,

[1 2 3 4 7 #]).

2. Press and hold the [9] key until two beeps sound

to send a Test Report.

3. When complete, repeat Step 1 to turn the

Telephone Monitor Mode off.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comentarios a estos manuales

Sin comentarios

Bosch CC880/LP880, SC8016 Especificaciones Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch CC880/LP880, SC8016