Bosch LTC 2604 Manual de instrucciones descargar pdf (Pagina 15)

IntuiKey Series | Instruction Manual | Accessing the Keyboard Control Menu

Bosch Security Systems | 28 June 2004

3.4.1 Accessing the Keyboard Control Menu

1. Press PROD to view the Product Selection menu

(see FIGURE 3-2).

2. Press the softkey labeled Keyboard Control. The

Keyboard Control softkey can always be found at

the very end of the device listings.

3. The Softkey Display shows the Keyboard Control

main menu (see FIGURE 3-3). A review of the

Keyboard Control menu options follows.

FIGURE 3-3 Keyboard Control Menu

3.4.2 Keyboard Control Menu Options

Exit

Reverts to the Product Selection menu.

Factory Reset

Resets the keyboard to the following states:

Product Selected NONE

Key Click ON

Display Inverse Normal (black on white)

MUX Destination Addr 1

Softkey Contrast 9

Status Display 6

Contrast

MUX User Level No Access

Language NONE

Allegiant Baud 9600

Not Used

Language Select

For selection of the display language. Choose from

the following languages: English, French, Spanish,

Italian, Dutch, and German. Pressing the next or

previous arrow jumps between this menu and the

Polish and Portuguese option menu.

Additional information is shown below the

language, including its version number, the font

table number that it utilizes for its characters, and a

schema number that is used for internal control

purposes.

Keyboard Test

Displays a keyboard test screen on the softkey

display. Press ENTER to exit the keyboard test

mode. As each key is pressed, an indicator

displays on the screen. If the joystick is moved, its

present variable speed value is displayed. Pan and

Tilt ranges from 0 to 15; Zoom ranges from 0 to 7.

LCD Test

Different patterns are displayed on the softkey

display, and the alarm LED flashes. Each pattern

displays for approximately two (2) seconds.

Joystick Autocal

Auto-calibrates the joystick (allow the joystick to

self-center, then press ENTER). The softkey

display then indicates New Values Saved.

Not Used

Firmware Upgrade

Places the keyboard into a password-protected

mode that allows upgrade of the internal software

via serial connection to a host computer. See

APPENDIX C for details on entering passwords.

Not Used

Allegiant Baud

This password-protected option is used to set the

baud rate of the keyboard’s Allegiant port. In most

cases, this setting should not be changed unless

directed by the factory. The settings must match in

both the keyboard and the Allegiant. Two rates are

available, 9600 (default) and 19,200. The current

setting is displayed on the menu screen.

Exit

Factory Firmware

Reset Upgrade

Allegiant

Language

Baud

Select

9600

Keyboard Contrast

Te st Adjust

LCD Key Click

Te s t On/Off

Joystick Display

Auto Cal. Inverse

Normal

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Comentarios a estos manuales

Sin comentarios

Bosch LTC 2604 Manual de instrucciones Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch LTC 2604