IntuiKey Series | Instruction Manual | Controlling Divar Series Digital Video Recorders
Bosch Security Systems | 28 June 2004
EN
|
32
4. Help
Accesses the DVR’s on-screen HELP menu.
5. Protect
It is possible to mark a video recording so it cannot
be overwritten.
a. During playback, press the Protect key to mark
the beginning of a protected recording.
Playback will pause and a dialog window will
appear, showing the time and date of this
selection.
b. Press the Select key to continue playing the
video that you wish to protect. The Escape key
cancels and exits this mode.
c. To mark the end of the protected recording,
press the Product key a second time. The
playback will pause and a dialog window will
appear showing the time and date of both the
start and end times of the protected recording.
d. Press the Select key to protect the marked video
from deletion. Press Escape to cancel.
FIGURE 5-6
6. Select DVR
Press this button to select another device to control.
The status display will change to display the
following: Enter the address of the desired device to
make the keyboard immediately switch to that
device’s main menu.
This softkey provides the same function as pressing
and holding the PROD key for longer than 1
second.
7. D ivar Audio
This toggle button is used to enable or disable the
keyboard audio beeper that sounds in response to
DVR error messages or alarm/action events.
Enabling or disabling this option affects all DVRs
connected to the keyboard.
Address
__
DVR
Error Name Description
Error 1 No Communication The keyboard cannot communicate with the DVR.
Error 2 Invalid Keyboard Entry An invalid number has been entered on the keyboard.
Error 3 Invalid DVR Number A DVR number less than 1 or greater than 30 was entered.
Error 4 DVR Not Found No DVRs were found during search.
5.3 DVR Error Messages
Comentarios a estos manuales