Bosch LTC 2604 Manual de instrucciones descargar pdf (Pagina 38)

IntuiKey Series | Instruction Manual | Controlling System4 Video Multiplexers

Bosch Security Systems | 28 June 2004

2. When in the product menu, the Allegiant product is

not shown:

•Verify that you are using a KBD-Universal. By

removing power from the keyboard and

reapplying it, a sign-on banner is displayed on

the keyboard. The top line of both the softkey

display and status display states the type of

keyboard in use (only KBD-Universal is

capable of controlling Allegiant Series Video

Switchers).

• Check all interconnect cables for cut or broken

wires between the keyboard and other devices.

• The KBD only supports “.6P” keyboard

protocol.

3. Limited key and joystick operation:

•To verify the operation of the keyboard, from

the Product menu, select KEYBOARD

CONTROL, then press the softkey associated

with KEYBOARD TEST. This allows the

verification of the operation of all keys and the

joystick.

7. 3 Camera Control

1. Pressing a softkey associated with a camera

command does not return the expected response:

•Some camera functions are lockable. No softkey

is associated with camera command unlock;

therefore, unlock the camera commands

manually.

•The keyboard lists camera commands. Some

commands may not be supported by the

presently selected camera — see the manual

associated with the camera for specific camera

function information.

2. Camera function not found in menus:

• As of Gen3A Dome Version 2.0, all camera

functions are accessible via the AutoDome’s

Advanced Menu. Select Camera Controls

and press the Advanced Menu softkey.

3. The joystick doesn’t appear to work:

• Ensure that you are controlling a movable

camera.

• Ensure that all cabling is correct.

•It is possible that the joystick needs to be

recentered. From the Product menu, select

KEYBOARD CONTROL and press the

JOYSTICK AUTOCAL softkey, then follow

the on-screen instructions.

7. 4Miscellaneous

1. Upon powering up the keyboard, the bootloader

screen appears with the message Bootloader User

Requested:

• The keyboard was placed in firmware upgrade

mode. If you do not wish to load new

firmware, press CLR.

2. Upon powering up the keyboard, the bootloader

screen appears with the message Bootloader BAD

CHECKSUM:

• An error has been detected in the firmware.

Reloading the firmware should solve the

problem. Refer to the Software Update section

of www.boschsecuritysystems.com for details on

upgrading keyboard firmware. If this does not

resolve the problem, contact Customer

Support.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 47 48

Comentarios a estos manuales

Sin comentarios

Bosch LTC 2604 Manual de instrucciones Pagina 38

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch LTC 2604