Bosch ICP-VR8488 Especificaciones descargar pdf (Pagina 14)

ICP-VR8488 | Quick Reference Guide | 8.0 Using the System EN | 14

Bosch Security Systems, Inc. | 12/08 | F01U089640-01

Example

To program Phone Number 1 for Destination 1 as

96721233 and the Account Number for Destination 1

as 9876:

1. Enter the Installer Code and press [#] to enter

Installer’s Programming Mode.

For example, [1 2 3 4 #].

2. Enter [0 #] to move to Location 000.

3. Enter:

[9 * # 6 * # 7 * # 2 * # 1 * # 2 * # 3 * # 3 *] to

program Phone Number 1 for Destination 1 as

96721233.

4. Enter [3 4 #] to go to Location 034.

5. Enter [0 * # 0 * # 9 * # 8 * # 7 * # 6 * #] to

program Account Number for Destination 1 as

9876.

6. Enter [9 6 0 #] to exit from the Installer’s

Programming Mode.

7.1 Programming Option Bit Locations

Option bit locations enable you to program any

combination of up to four different options within

the same location. This feature saves time

programming and reduces the number of locations to

be programmed.

Example

If at Location 177 you only want options 1, 2, and 4,

add the numbers together and the total is the

number to be programmed. For example, the

number to be programmed is 7 (1 + 2 + 4 = 7).

Table 2: Location 177 Programming Option

Bits

Option Description

1 Dialer reporting functions allowed.

2 Remote arming by telephone allowed.

4 Answering machine bypass only when armed.

8 Use Bell 103 for FSK format

(disabled = CCITT V21).

8.0 Using the System

8.1 Assigning RF Sensors

Before programming the wireless sensors, you must

assign each RF sensor to a zone. You can assign up

to 16 wireless RF sensors to the ICP-VR8488

Intruder Alarm System across eight separate zones.

RF sensors 1 to 8 are already assigned to their

corresponding zone (for example, RF Sensor 1 is

assigned to Zone 1, RF Sensor 2 is assigned to Zone

2, and so on).

You assign RF sensor devices to Zones 1 to 8 by

programming Locations 616 to 623. Each location

represents an RF sensor device. You can assign

multiple RF sensors to the same zone.

8.2 Adding RF Sensors

Do the procedure below to program the ID number

of each RF sensor into the system. The RF sensor is

assigned to the zone mapped in Locations 616 to

623.

1. Enter the Installer Code and press [0 #].

For example, [1 2 3 4 0 #].

2. Enter the RF sensor number (1 to 16) to add and

press [#].

For example [1 #] to add Sensor 1 or [1 6 #] to

add Sensor 16.

3. Enter the nine-digit ID number found on the RF

sensor and press [#].

For example, [0 0 0 3 8 7 9 4 1 #].

8.3 Deleting RF Sensors

To delete an RF sensor:

1. Enter the Installer Code and press [0 #].

For example, [1 2 3 4 0 #].

2. Enter the RF sensor number (1 to 16) to delete

and press [#].

For example, [1 #] to delete Sensor 1 or [1 6

#] to delete Sensor 16.

3. Press [*] to delete the RF sensor from the system.

8.4 Adding RF Keyfobs

The ICP-VR8488 supports a total of 16 users. Users

1 to 8 are assigned as PIN codes and Users 9 to 16

are assigned as remote radio RF codes. Follow the

steps outlined below to add RF keyfobs.

1. Enter your Master Code and press [1 #].

For example, [2 5 8 0 1 #].

2. Enter the user number (9 to 16) to add and press

[#].

For example, [9 #] to add RF Keyfob 1 or

[1 6 #] to delete RF Keyfob 8.

3. Enter the nine-digit ID number found on the RF

keyfob and press [#].

For example, [0 0 8 0 2 1 6 2 9 #].

8.5 Deleting RF Keyfobs

To delete an RF keyfob:

1. Enter your Master Code and press [1 #].

For example, [2 5 8 0 1 #].

2. Enter the user number (9 to 16) to delete and

press [#].

For example, [9 #] to delete RF Keyfob 1 or [1 6

#] to delete RF Keyfob 8.

3. Press [*] to delete the RF keyfob from the

system.

8.6 Arming the System (On)

8.6.1 AWAY Mode

Press and hold [#] until two beeps sound.

Enter your code and press [#].

For example, [2 5 8 0 #].

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Comentarios a estos manuales

Sin comentarios

Bosch ICP-VR8488 Especificaciones Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch ICP-VR8488