Bosch ICP-VR8488 Especificaciones descargar pdf (Pagina 8)

ICP-VR8488 | Quick Reference Guide | 3.0 Installation EN | 8

Bosch Security Systems, Inc. | 12/08 | F01U089640-01

Figure 7: Telephone Lead

1 – Telephone lead

10. Push the AC MAINS lead through the hole as

shown in Figure 6 on page 7.

If you are mounting the ICP-VR8488 on the wall, do

Step 11. If not, do Step 12.

11. Mount the ICP-VR8488 on a suitable location

using the four screw holes located in the base of

the ICP-VR8488 case as shown in Figure 8 on

page 8.

Figure 8: Wall Mounting Holes

1 – Mounting holes

When mounting the unit on a wall, the

ICP-VR8488 PCB is located at the bottom

so when you attach the lid, the lid slides

upward.

Continue with Step 13.

12. Turn the base of the unit upside down and place

the rubber feet on the four locations indicated in

Figure 9 on page 8.

Figure 9: Rubber Feet Locations

1 – Rubber feet

13. Connect the telephone lead to the telephone

socket (PHONE1) on the ICP-VR8488 circuit

board as shown in Figure 10 on page 8.

Figure 10: Telephone Connection

1 – Telephone socket

14. Install the ICP-VR8488 PCB and DC Siren back

into the case as shown in Figure 5 on page 7.

15. Install the RF Receiver PCB back into the case

(refer to Figure 4 on page 7) and connect the data

cable (Figure 3 on page 7).

16. Connect the plug pack’s leads to the 18–22 VAC

and ground connectors on the ICP-VR8488 PCB

as shown in Figure 11 on page 9.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Sin comentarios

Bosch ICP-VR8488 Especificaciones Pagina 8