Bosch ICP-VR8488 Especificaciones descargar pdf (Pagina 24)

ICP-VR8488 | Quick Reference Guide | 9.0 Programming Guide EN | 24

Bosch Security Systems, Inc. | 12/08 | F01U089640-01

Event Codes (continued)

Event

Code

Description

3 4 Codepad Panic (multibreak) v1.05+

3 5 Mimic zone 1

3 6 Mimic zone 2

3 7 Mimic zone 3

3 8 Mimic zone 4

3 9 Mimic zone 5

3 10 Mimic zone 6

3 11 Mimic zone 7

3 12 Mimic zone 8

3 13 Reserved

3 14 Reserved

3 15 Reserved

4 0 Reserved

4 1 Reserved

4 2 Reserved

4 3 Reserved

4 4 Reserved

4 5 Chime

4 6 Zone not sealed

4 7 Zone not sealed after exit time

4 8 Reserved

4 9 AC MAINS cycle (60 Hz or 50 Hz)

4 10 Area 1 – zone unsealed

4 11 Area 2 – zone unsealed

4 12 Reserved

4 13 Reserved

4 14 Reserved

4 15 Reserved

5 0 Reserved

5 1 Reserved

5 2 Area 1 in alarm (CC488 only)

5 3 Area 2 in alarm (CC488 only)

5 4 Reserved

5 5 Reserved

5 6 Area 1 armed (CC488 only)

5 7 Area 2 armed (CC488 only)

5 8 Reserved

5 9 Reserved

5 10 Area 1 disarmed

5 11 Area 2 disarmed

5 12 Reserved

5 13 Reserved

5 14 Any areas armed (CC488 only)

5 15 Any areas disarmed (CC488 only)

6 0 Area 1 codepad data terminal (CC488 only)

6 1 Area 2 codepad data terminal (CC488 only)

Polarity (Modes)

Option Description

Output not used

Normally open, going low

Normally open, pulsing low

Normally open, one shot low

Normally open, one shot low (reactivate)

Normally open, one shot low (can reset)

Normally open, one shot low (alarm)

Normally open, latching low

Normally low, going open

Normally low, pulsing open

Normally low, one shot open

Normally low, one shot open (reactivate)

Normally low, one shot open (can reset)

Normally low, one-shot open (alarm)

14 Normally low, latching open

Time Base

Option Description

1 200 ms

2 1 sec

3 1 min

4 1 hour

Time Base Multiplier

Enter a value between 01 and 99.

One Shot Mode

When you program the output polarity as one shot,

the time base is multiplied by the time base

multiplier. For example, if the time base = 2 and the

multiplier = 05, the output operates for 10 sec.

Pulsing Mode

When you program the output polarity as pulsing,

the time base becomes the ON time and the

multiplier becomes the OFF time. The OFF time is

the time base, which is multiplied by the multiplier.

For example, if you want the output to pulse 1 sec

ON and 5 sec OFF, you would program time base as

1 and the multiplier as 5.

Entry Time 1

Location

466 to 467

Location Default

Increments of 1 sec

(0 to 15 sec)

466

Increments of 16 sec

(0 to 240 sec)

467

Entry Time 2

Location

468 to 469

Location Default

Increments of 1 sec

(0 to 15 sec)

468

Increments of 16 sec

(0 to 240 sec)

469

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios

Bosch ICP-VR8488 Especificaciones Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch ICP-VR8488