ICP-VR8488 | Quick Reference Guide | 8.0 Using the System EN | 15
Bosch Security Systems, Inc. | 12/08 | F01U089640-01
8.6.2 STAY Mode 1
Press and hold [*] until two beeps sound.
Or
Enter your code and press [*].
For example, [2 5 8 0 *].
8.6.3 STAY Mode 2
Press and hold [0] until two beeps sound.
8.7 Disarming the System (Off)
To turn the system off from AWAY Mode or STAY
Mode:
Enter your code and press [#].
For example, [2 5 8 0 #].
8.8 Isolating Zones
8.8.1 Standard Isolate Method
1. Press [*] twice.
2. Enter the zone number to isolate and press [*].
Repeat Step 2 to isolate more than one zone.
3. When finished, press [#] to exit.
8.8.2 Code to Isolate
1. Press [*].
2. Enter your User Code and then press [*].
3. Enter the zone number to isolate and press [*].
Repeat Step 2 to isolate more than one zone.
4. When finished, press [#].
8.9 Set First Test Report
1. Enter the Installer Code and press [1#].
For example, [1 2 3 4 1 #].
2. Enter the number of days (0 to 15) to wait until
the first Test Report and press [#].
8.10 Event Memory Recall
Enter the Installer Code and press [8 #].
For example, [1 2 3 4 8 #].
The last 40 events (non-partitioned) or
last ten events (partitioned) display in
reverse order (that is, most recent to
least recent).
8.11 Walk Test Mode
1. Enter the Installer Code or your Master Code
and press [7 #].
For example, [1 2 3 4 7 #].
2. Test each zone.
3. Press [#] to exit.
8.12 Satellite Siren Service Mode
Enter the Installer Code and press [5 #].
For example, [1 2 3 4 5 #].
8.13 Telephone Monitor Mode (Toggle
On/Off)
1. Enter the Installer Code and press [6 #].
For example, [1 2 3 4 6 #].
2. To send a Test Report, press and hold [9] until
two beeps sound.
3. When complete, repeat Step 1 to toggle
Telephone Monitor Mode off.
Table 3: Telephone Monitor Mode Zone LEDs
Zone LED Dialing Event
1 Telephone line seized
2 Dialing telephone number
3 Handshake received
4 Data being sent
5 Kiss-off received
None Released telephone line
8.14 Add/Delete User Code
8.14.1 Add a User Code
1. Enter your Master Code and press [1 #].
For example, [2 5 8 0 1 #].
2. Enter the user number (1 to 16) to add or
change, and press [#].
3. Enter the new code and press [#].
8.14.2 Delete a User Code
1. Enter your Master Code and press [1 #].
For example, [2 5 8 0 1 #].
2. Enter the user number (1 to 16) to delete and
press [#].
3. Press [*] to delete the user code.
8.15 Change Domestic Telephone
Numbers
1. Enter the Installer Code or your Master Code
and press [2 #].
For example, [1 2 3 4 2 #].
2. Enter the digits for the telephone number.
3. If your are changing more than one telephone
number, enter [* 4] (which inserts a break
between phone numbers), and repeat Step 2.
4. Press [#] to exit.
8.16 Turn Outputs On/Off
1. Enter your Master Code and press [5 #].
For example, [2 5 8 0 5 #].
2. Enter the output number (1 to 3) to toggle on or
off.
3. Press [#] to turn the output on, or [*] to turn the
output off.
4. Press [#] to exit.
8.17 Setting Date and Time
1. Enter your Master Code and press [6 #].
For example, [2 5 8 0 6 #].
2. Enter the day (DD), month (MM), year (YY),
hour (HH), and minute (MM).
3. Press [#] to exit.
(16 paginas)
(123 paginas)
(16 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales