Bosch ICP-VR8488 Especificaciones descargar pdf (Pagina 16)

ICP-VR8488 | Quick Reference Guide | 8.0 Using the System EN | 16

Bosch Security Systems, Inc. | 12/08 | F01U089640-01

8.18 Toggle Day Alarm On/Off

Press and hold [4] until two beeps sound.

Day Alarm toggles on or off.

8.19 STAY Mode 2 Zones - Program

1. Enter the Installer Code or your Master Code

and press [4 #].

For example, [1 2 3 4 4 #].

2. Enter the zone number the system should

automatically isolate and press [*].

3. Repeat Step 2 to select another zone to be

automatically isolated when armed in STAY

Mode 2.

4. Press [#] to exit.

8.20 Fault Analysis

1. Press and hold [5] until two beeps sound.

2. The zone indicators display the fault condition.

Refer to Table 4 on page 16.

3. Press [#] to exit.

Table 4: Fault Indicators

Zone

Indicator

Fault Description Hold Down Button Zone Indicator Fault Condition

1 System Fault 1 1 Battery Fail

2 Date and Time

3 RF Receiver Fail

4 Horn Speaker Fail

5 Telephone Line Fail

6 EEPROM Fault

7 AUX Power Supply Fail

8 AC Fail

2 RF Low Battery 2 1 to 8 Zones 1 to 8 RF Low Battery

3 Zone Tamper Alarm 3 1 to 8 Zones 1 to 8 Tamper Alarm

4 Sensor Watch Fault 4 1 to 8 Zones 1 to 8 Sensor Watch Fail

5 RF Sensor Watch 5 1 to 8 Zones 1 to 8 RF Sensor Watch Fail

6 Communication Fail 6 1 Receiver 1 Fail

2 Receiver 2 Fail

8.21 Modem Call (Alarm Link)

Press and hold [6] until two beeps sound.

8.22 Latching Outputs (Reset)

Press and hold [7] until two beeps sound.

8.23 Codepad ID/Buzzer Tone

Press and hold [8] until you hear the desired buzzer

tone.

8.24 Test Report

Press and hold [9] until two beeps sound.

8.25 Speaker Test

Press and hold [1] until two beeps sound.

The speaker sounds for 2 sec.

8.26 Bell Test

Press and hold [2] until two beeps sound.

The piezo siren sounds for 2 sec.

8.27 Strobe Test (Toggle On/Off)

1. To turn the strobe on, press and hold [3] until

three beeps sound.

2. To turn the strobe off, press and hold [3] until

two beeps sound.

8.28 Telco Arm Sequence (Call Forward

On)

This option allows you to enable the Call Forward –

Immediate On sequence or Call Forward – No

Answer sequence that automatically operates when

you arm the system in the AWAY Mode.

1. Enter the Installer Code or your Master Code

and press [3 #].

For example, [1 2 3 4 3 #].

2. Enter [1 #].

3. Enter the Call Forward On sequence.

4. Press [#] to exit.

8.29 Telco Disarm Sequence (Call

Forward Off)

This option allows you to disable the Call Forward –

Immediate On sequence or Call Forward – No

Answer sequence that automatically operates when

you arm the system in the AWAY Mode.

1. Enter the Installer Code or your Master Code

and press [3 #].

For example, [1 2 3 4 3 #].

2. Enter [2 #].

3. Enter the Call Forward Off sequence.

4. Press [#] to exit.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Comentarios a estos manuales

Sin comentarios

Bosch ICP-VR8488 Especificaciones Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch ICP-VR8488