Bosch Solution 16plus Especificaciones descargar pdf (Pagina 8)

STAY Indicator

The STAY indicator is used to display that the system is armed in STAY Mode 1 or STAY

Mode 2. The STAY indicator will also flash in unison with the AWAY indicator when

programming various options throughout the operator’s manual.

Refer to page 11 for information on the different methods of arming in STAY Mode 1. For

information and the method of arming in STAY Mode 2, refer to page 12.

STAY Indicator Definition

System Is Armed In STAY Mode 1 Or STAY Mode 2

Off

System Is Not Armed In STAY Mode 1 Or STAY Mode 2

Flashing Twice A Second

Zone Isolating Mode Or Setting STAY Mode 2 Zones

Flashing Once Every

3 Seconds

Day Alarm Status – Day Alarm Turned On

Table 3: STAY Indicator

System Disarmed

This indicator will display with the indicator when the system has been disarmed.

MAINS Indicator

The MAINS indicator is used to display that the systems AC mains supply is normal or has

failed.

MAINS Indicator Definition

AC Mains Power Normal

Flashing

AC Mains Supply Has Failed

Table 4: MAINS Indicator

Off Indicator / Zone Sealed

The indicator will display when the system is in the disarmed state and will flash when a

zone becomes unsealed during the disarmed state. The indicator will stop flashing when all

zones are sealed.

On Indicator / Zone In Alarm

The indicator will display when the system is armed in AWAY Mode and will flash

when an alarm occurs. The indicator will reset once a valid user code has been entered.

8 !"#$%&"'()* Operators Manual

ISSUE160.DOC Electronics Design and Manufacturing Pty Limited

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

Sin comentarios

Bosch Solution 16plus Especificaciones Pagina 8