Bosch HTS 62 Manual de usuario descargar pdf (Pagina 17)

Configuration Manager Programming steps | en 17

Bosch Security Systems User Manual 970.129b | V2 | 2014.05

03. Radio jamming

The Carephone 61/62 sends a technical message to the monitoring centre

when a radio signal from another device disturbs it. Check the tick-box to

enable this function.

25. Radio transmission monitoring

The Carephone 61/62 can monitor the wireless transmitters that are

assigned. The wireless transmitters send a signal to the Carephone 61/62

at regular intervals. A failure message is sent to the monitoring centre if

the Carephone 61/62 does not receive this signal at least once a week.

Check the tick-box to enable this function.

28. Call forwarding

It is possible for the monitoring centre, if it supports this functionality, to

command the Carephone 61/62 to forward the current call to a new

destination using a specified protocol. You can allow the Carephone 61/62

to use the specified protocol or force it to use telephone protocol. This

function is only possible with protocols RB2000E (target 0), CPC (target 3)

and RBIP (target 9). Choose between:

– 0 = forwarding to another number, 1 = forwarding to a telephone.

30. Device number

When an emergency call is made, this number is sent to the monitoring

centre. The number can be up to 12 digits long. Numbers 0000, 9998, 9999

and 999999 may not be used. Default value is 1248.

31. Sign in / sign out

To specify whether the sign in or sign out of the activity monitor will

initiate a call to a call recipient. Check the tick-box to enable this function.

32. Call progress tones audible

You can choose to hear the call progress tones when the Carephone makes

a call. Check the tick-box to enable this function.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Sin comentarios

Bosch HTS 62 Manual de usuario Pagina 17