Bosch HTS 62 Manual de usuario descargar pdf (Pagina 22)

22 en | Programming steps Configuration Manager

970.129b | V2 | 2014.05 User Manual Bosch Security Systems

26. Callback waiting time

The callback function enables the help provider or monitoring centre to

terminate an alarm after having acknowledged it. The Carephone must be

called back, or the Action button must be pressed, after an alarm has been

acknowledged. Define the waiting time after the acknowledgement, during

which a call back will be accepted. If this call back waiting time has

elapsed, then a new call will be sent by the Carephone.

– Enter a time between 0 and 9 minutes. 0 = off. Default value is 0.

60. Number of announcements when calling a telephone

Specify how often the Carephone will announce the recorded message.

– 0 = no announcement, from 1 to 9 for the required number of

announcements. Default value is 2.

61. Incoming call recognition

Incoming phone calls can be accepted and terminated by the Carephone

61/62’s emergency call button or by using the wireless transmitter if it is

programmed for emergency call initiation. The ring tone on the Carephone

61/62 can be switched on or off and the volume can be adjusted.

– 0 = off (no incoming call can be answered and terminated by the

wireless transmitter or call button)

– 1 = with ring tone

– 2 = with loud ring tone

– 3 = with soft ring tone

– 4 = without ring tone (only the phone rings)

– Default value is 0.

71. Action button (S button)

The Action button can be configured differently according to your needs:

– 0 = off

– 1 = service button / direct call (e.g. service call to a monitoring centre

or direct call to a relative)

– 3 = activate relay output (e.g. a door opener)

– Default value is 0.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Sin comentarios

Bosch HTS 62 Manual de usuario Pagina 22