Bosch LTC 8555 Manual de instrucciones descargar pdf (Pagina 42)

Bosch Security Systems | December 8, 2004

13.1.2 User Function 1 -

Local Keyboard Test

User Function 1 can be used as a local test to ensure

that all the keyboard LEDs and switches are working.

This function automatically calibrates the center position

of the analog joystick on LTC 8555 keyboards. Upon

entering this test, the keyboard will beep and all LEDs

will light for about two seconds. The USER should note

if there are any LED failures.

Each key may be pressed to display a unique code

number associated with that key. Follow the TABLE

below to ensure that all keys are properly being

processed by the keyboard. Push USER last, as this

causes the keyboard to exit the test mode.

If the logon system feature has been selected by the

system installer, the same local test may be initiated

while the keyboard is not ON LINE by pressing *.

Keyboard tests show a speed indicator value in the first digit position

when performing pan, tilt, or zoom actions.

13.1.3 User Function 2 -

Show Keyboard Port Number

User Function 2 may be used to identify which

port a keyboard is plugged into. After entering

User Function 2, read the keyboard port number

from the monitor display on the keyboard. If using

the LTC 8555 Series keyboard, press [User] to exit.

13.1.4 User Function 3 -

Select Keyboard Beeper ON/OFF

When User Function 3 is selected, the keyboard user

may enable/disable the keyboard audio beeper. If

using the LTC 8555 Series keyboard, press [ON] to

enable the beeper or [OFF] to disable it. Press [User]

to exit. Upon power up of the keyboard and whenever

the Allegiant system undergoes a reset, this setting is

set to [ON].

13.1.5 User Function 4 -

Adjust Position of Monitor Overlay

User Function 4 allows the characters on the video

monitor display to be positioned from the keyboard.

Only the display on the monitor that the keyboard is

currently connected to is effected.

If using the LTC 8555 Series keyboard, use the joystick

to position the display as required. Press [Enter]to

store the position. Press [User] to exit.

13.1.6 User Function 5 -

Monitor Display Brightness / Status Selection

The white portion of the characters on the video

monitor display may be made brighter or dimmer by

the User Function 5. Only the display on the monitor

that the keyboard is currently connected to is effected.

After entering the mode, there are four possible

settings. If using the LTC 8555 Series keyboard, moving

the joystick up increases the brightness, and moving it

down decreases the brightness.

The User Function 5 also permits selection of either

the status display or a 12-character monitor message

to appear in the first line of the monitor display. The

status display indicates alarm, sequence, and lockout

information regarding the monitor. The monitor

message is a stationary display. This means the display

will not change as video is switched from camera to

camera on the monitor. After entering the mode, move

the joystick left to select monitor message format, and

right to select status format. If using LTC 8555 Series

keyboard, to exit the mode, press [User].

LTC 8100, LTC 8200, LTC 8300 Series | Instruction Manual | Keyboard User Functions

Key No.

IRIS UP 044

IRIS DOWN 045

FOCUS UP 042

FOCUS DOWN 043

ZOOM CLOCKWISE

041

ZOOM COUNTER

040

CLOCKWISE

ALARM 004

USER 000

SEQUENCE 032

HOLD 036

RUN 033

PREVIOUS 035

NEXT 034

#1 010

#2 018

#3 026

#4 011

#5 019

#6 027

Key No.

CAMERA 024

MONITOR 008

ACKNOWLEDGE 005

PROGRAM 002

SET 001

SHOT 009

OFF 025

ON 017

*016

LOCK 003

#7 012

#8 020

#9 028

CLEAR 037

#0 013

ENTER

029

052

RIGHT

051

DOWN

050

LEFT

053

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 63 64

Comentarios a estos manuales

Sin comentarios

Bosch LTC 8555 Manual de instrucciones Pagina 42

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch LTC 8555