Bosch LTC 8555 Manual de instrucciones descargar pdf (Pagina 46)

Bosch Security Systems | December 8, 2004

LTC 8100, LTC 8200, LTC 8300 Series | Instruction Manual | Keyboard User Functions

Move the joystick left to blank the left side of the

display from the monitor and right to return it. Refer

to User Function 5 or 25 to verify brightness level.

Press [Enter] to update all system monitors to the

selected format. If using the LTC 8555 Series keyboard,

press [User] to exit.

13.1.28 User Function 27 -

Select Keyboard Login

This function controls the system’s keyboard login

feature. Move the joystick up or down to select the

mode for the system to function in. If the login feature

is enabled (MUST USE KBD PWD is selected), the

system keyboards require each user to login and logoff

the system. All users are required to enter a user

number and correct password to interact with the

system. If the login feature is disabled (NO KBD

PWD LOGIN is selected), system keyboards are

always online with the system.

Once selection is made, exit the User Function mode

and reset the system either via keyboard User Function

15, or by removing and restoring the main AC power

to the system. Once the system has been reset, the

keyboard login function will be active and all system

keyboards will need to be logged in to access the

system.

13.1.29 User Function 28 -

Select Console Login

This function controls the system’s external

Console port login feature. After entering the mode,

move the joystick up or down to select the mode in

which the system should function. If the login feature

is enabled (MUST USE CON PWD is selected), any

external PC or other computing device will be

required to login to communicate with the system.

External computing devices are required to enter a

user number and correct password. If the Console

selected), the Console port is available for

communication.

Once the selection is made, exit the User Function

mode and reset the system, either via keyboard

User Function 15 or by removing and restoring the

main AC power to the system. Once the system has

been reset, the Console login function is active, and

all external computing devices need to login to access

the system.

13.1.30 User Function 29 -

Reset RS-232 Parameters to Default

This function returns the system’s external

RS-232 ports to a known default state. After entering

the mode, enter a valid password. The system will

reset after placing the RS-232 protocols back to the

default state. Refer to the Section 9, FACTORY

DEFAULT SETTINGS for additional information.

13.1.31 User Function 30 -

Set Console RS-232 Parameters

Priority level 1 users can select the RS-232 baud rate

and handshake options for the system’s Console port,

via this function. Upon entry to this mode, the current

settings are displayed. Move the joystick up/down to

select the baud rate, and left/right to select the

handshake option. After being changed, the port is

also automatically set to eight data bits, no parity, and

one stop bit. Once new settings have been selected,

enter the user password and press [Enter]. If using

the LTC 8555 Series keyboard, press [User] to exit.

13.1.32 User Function 31 -

Set Printer RS-232 Parameters

Priority level 1 users can select the RS-232 baud rate

and handshake options for the LTC 8300 system’s

Printer port, via this function. Upon entry to the mode,

the current settings are displayed. Move the joystick

up/down to select the baud rate, and left/right to select

the handshake option. After being changed, the port is

also automatically set to eight data bits, no parity, and

one stop bit. Once new settings have been selected,

enter the user password and press [Enter]. If using the

LTC 8555 Series keyboard, press [User] to exit.

13.1.33 User Function 32 -

Reserved Function

13.1.34 User Function 33 -

Display User Number and Priority

This function displays the current user’s number and

priority level on the monitor screen. The user number

will be displayed on the top line and the user’s priority

level will be displayed on the bottom line of the

monitor screen. If using the LTC 8555 Series keyboard,

press [User] to exit.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 63 64

Comentarios a estos manuales

Sin comentarios

Bosch LTC 8555 Manual de instrucciones Pagina 46

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch LTC 8555