Bosch SF8172V Especificaciones descargar pdf (Pagina 126)

ONVIF

33-4 Camera Handler Release Notes

• Audio Codec - AAC, G711 and G726 (where supported)

• PTZ - applies to cameras with mechanical pan, tilt and optical zoom

• Dry contact events

• Username Authentication

Audio/Video Stream Feature

• Changing the stream settings such as codec, resolution, FPS or quality of a selected video

stream may require up to 5 seconds of time delay to re-establish the video stream.

• Video quality settings for MJPEG can differ across manufacturers

Default Username & Password

• Username: admin

• Password: ADMIN

Note

The user must pre-configure the camera with an ‘admin’ user account

Configuring a Camera for ONVIF Communication

Steps needed to take to add a camera to the NVR:

1 Access the camera and assign a desired IP address

2 If enabled, disable the RTSP authentication

a This is different from the username authentication

3 Verify the username/password group of the camera is admin/admin

a For the Illustra cameras, default username and passwords are acceptable for the

handler communication

b Other vendor cameras will need an administrator account created or modified

through the cameras web interface

4 Verify video streaming consists only of video, or Video and Audio to also enable audio (not

video + audio multiplexed together)

5 Reboot the camera for settings to take effect

6 Add the camera to the NVR

Note

Onvif devices must be added manually to the NVR using this procedure as they

cannot be added using Auto Discovery

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 174 175

Sin comentarios

Bosch SF8172V Especificaciones Pagina 126