Bosch SF8172V Especificaciones Pagina 138

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 175
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 137
Panasonic Corp
34-5
Limitations
Model Limitations
All
1 1.The model prefix of every Panasonic camera is irrelevant when it is
added to the NVR. For example, a Japanese model "DG-SC385" is
expected to have the same characteristics as the world wide model "WV-
SC385".
2 2.Fractional frame rate settings are not supported in the NVR.
3 3.NVR web GUI allows the Sharpness/Brightness/Saturation (under
Image Settings, Video Properties) to be changed. If the value is changed
and saved then the new displayed value may slightly differ from the value
that was saved. That slight difference is expected behavior. The difference
is due to the conversion of a 0 to 100 value to a different range value that
is actually stored on the camera. For example, the actual sharpness (or
aperture) range on the camera could be 0 to 31 or 0 to 63.
4 4.A cache mechanism has been used to cache many properties of the
camera (The setting under Image Settings). The cache is updated only
when the last updating time exceeds 300 seconds or after some camera
properties have been changed by NVR client. It's not recommended to
modify the camera settings directly on camera web GUI.
5 Cameras may not support 100 quality settings at the highest resolution. The NVR
will apply the quality change giving the impression change was successful but it
will not take effect as camera will refuse it – refresh NVR camera configuration to
display the correct Quality option.
NW502S, NP502,
SP334, SP304, SW314,
SC386, SC396, SC384,
SC385, SW395,SW559,
SF549, SF539, SP509,
SW558, SF548, SF538,
SP508, SW155, SW152,
SF135, SF132, ST162,
SW172, ST165,
SW174W, SW175,
SW316,SW316L
When Wide Dynamic Range is enabled (under Image Settings, Lens/Sensor
properties), these camera models have a defined limitation that Back Light
Compensation (under Image Settings, Video Properties) is not available. These
camera models will display Back Light Compensation as read only setting "0".
Vista de pagina 137
1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 174 175

Comentarios a estos manuales

Sin comentarios