Bosch SF8172V Especificaciones Pagina 155

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 175
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 154
Samsung
36-9
All models
which
support audio
All models which support audio will only support G711 codec, even if camera
supports G726.
N/A
All Codec MJPEG offers FPS 1-30 but only saves as 5 max. - camera only supports 5
FPS when Email/FTP profile is enabled on the MJPEG stream on the Camera Web
GUI
Before adding
camera to NVR,
disable the MJPEG
profile's "email/FTP
profile" by creating a
new MJPEG profile
and tick the
email/FTP profile and
record checkboxes on
the camera web GUI.
This will allow the
user to select all
Frame Rates
available.
SNB 6004 NVR 4.4: Samsung Handler: Local Client: SNB 6004 audio is out of sync on VE
Local Client, but is in sync on victor unified client.
N/A
SNB-5000
SNB-5000TJ
When MPV4 is set to 7FPS or below is selected; no video streams for any resolution.
The issue is confirmed by vendor, it is caused by very slow RTSP response when
FPS is set to less than 8. This limitation can cause issues when dual streaming with
MPV4.
Increase FPS to 8 or
above
SNB-5000 NVR 4.4: Samsung SNB-5000: dual stream does not appear to be picking up the
second stream settings, when live and alarm are set to stream 1, and stream 2 is set
to record, when using victor playback, the record and live will be the same. This
occurs occasionally. This can cause the FPS to be unstable and may fluctuate
between both stream FPS settings.
Set the record stream
as alarm stream.
All SNB-5000: When adding camera to NVR with wrong password group incorrect error
message displays: "AddVideo - no codecs to choose from!" rather than "Error adding
device".
N/A
SND-5080
SNP-3371
On NVR Image Settings page, a “could not retrieve the video or lens properties”
error message is occurring and the sharpness drop down menu is appearing blank.
Change the
sharpness settings
via the camera GUI:
Camera GUI -> Setup
-> Camera set up ->
Special -> Sharpness
level
When added to the
VE NVR the settings
will remain
configured.
All Some cameras may not contain “-“ or “:” or spaces between the MAC address. This
is only a cosmetic issue.
N/A
Model Known Issues Work Around
Vista de pagina 154
1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 174 175

Comentarios a estos manuales

Sin comentarios