Bosch SF8172V Especificaciones descargar pdf (Pagina 94)

AXIS Communications

28-7

5 An attempt to add a preset to AXIS encoders (with AD

Ultra 8 analog PTZ camera) will result in a “Error: query

not implemented” HTTP error being returned in response

to a “http://<ipaddress>/AXIS-

cgi/com/ptz.cgi?query=position&camera=1” HTTP

request. The reason for this is that the Sensormatic

driver for the AD Ultra 8 camera does not allow the

position to be queried. The parameter list retrieved from

the encoder will report that absolute pan, tilt, zoom is not

supported.

6 The number of presets allowed is capped at 50 for the

victor Client. When working with encoders, only the first

32 presets function properly. Axis documentation claims

each channel can support 100; however this does not

appear to be the case.

M7001 For Pelco analog cameras added to M7001 will produce shaky

video and video loss(Axis Encoder limitation - Axis Ticket

317173).

207W The victor client activity window shows an unexpected extra

offline entry and online entry for the AXIS 207W camera after it

has been disconnected and then reconnected. This second

offline/online entry is due to an apparent flaw in the AXIS 207W

camera.

Q1755 1 Q1755 without PT head installed will still show up as a

PTZ camera in NVR. However, none of the PTZ functions

will work. This limitation could apply to all cameras that

have built-in PT/PTZ head support.

2 An attempt to add a PTZ preset for AXIS Q1755 fails

because the getPositionSync method returns “Not

supported” error as a result of the AXIS Q1755 not

returning pan and tilt position info when PTZ position is

queried. The zoom position is returned but not the pan

and tilt position. Since the Q1755 cannot pan and tilt

without the motor accessory then perhaps the need to

set presets for zoom only is not critical.

240Q, 241Q When an AXIS 240Q or 241Q four-port encoder is added to the

NVR, camera slots will be created for all four ports regardless of

whether the encoder inputs are receiving analog signals. If an

analog signal is not preset, black video will be received by the

NVR and recorded / streamed to viewing clients. To conserve

NVR disk space and reduce network traffic, the camera slots

associated with the unused inputs can be deleted from the NVR

but they cannot be added again unless the entire encoder is

deleted and re-added.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 174 175

Comentarios a estos manuales

Sin comentarios

Bosch SF8172V Especificaciones Pagina 94

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch SF8172V