Bosch K2200 Series Guía de instalación descargar pdf (Pagina 10)

K2200 Series | Installation Guide | 2.0 K2200 Series Controllers EN | 10

Bosch Security Systems | 7/03 | 17375 1.3 / 46513C

• Automatically opens and closes doors at certain

times.

• Detects tamper conditions at the reader or its

own case.

• Controls the 8 on-board relays.

• Programs and monitors any Alarm Event

Modules (AEMs) that may be fitted.

2.2.5 Connecting Door Controllers

What makes the door controllers so flexible is the

ability to link controllers together to allow more

doors to be administered. The number of doors that

can be administered and the maximum number of

personnel that can be controlled, depends on the

type of administration system, see Section 3.0

Administration Systems.

Door controllers are connected together using

Readykey's six-wire bus. This is a proprietary

communications link that uses standard six-conductor

signal or alarm cable. For full details, see Section 4.0

Six-Wire Bus. Each group of door controllers

connected using the six wire bus requires one master

controller and one or more slave controllers.

For smaller systems (16 or 32 door administration

systems), one door controller is the master with up to

3 or 7 slave controllers.

For larger systems (up to 128 doors) the Central

Network Controller (CNC) becomes the master and

all the door controllers (up to 32) on the six-wire bus

are slaves.

Remote sites, connected to a CNC via an RS-232

serial link, are set up as a 32 door system with one

door controller as the master, handling

communications with the CNC, and up to 7 slave

door controllers.

Every Readykey K2200 Series Controller

can be configured as a master or slave.

You do not need to purchase different

types of door controller.

Note:

If you are integrating the controller with older

Readykey systems, he highest firmware version needs to

be the first panel on that cluster.

2.2.6 Compatibility

All references in this document to Readykey

products assume the following software version

numbers, or higher:

Table 4: Compatible software version numbers

Readykey Product Version #

K2200 2.11

K2100/K1100 3.37

Readykey for Windows 6.71

Multi-Site Central Network Controller 2.34

Alarm Event Manager 1.0

Wiegand Interface 1.0

If you are upgrading an existing system, check with

Technical Support at (888) 886-6189 that all the

components are suitable and whether any upgrades

are required.

The Readykey 2000 Series Controllers perform and

function in compliance with BSI PD2000-1 - A

definition of Year 2000 Conformity Requirements.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Comentarios a estos manuales

Sin comentarios

Bosch K2200 Series Guía de instalación Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch K2200 Series