Bosch K2200 Series Guía de instalación descargar pdf (Pagina 44)

K2200 Series | Installation Guide | 6.0 Configuration and Testing EN | 44

Bosch Security Systems | 7/03 | 17375 1.3 / 46513C

6.1.6 Test Mode

The test mode allows the system to have a

“functional” test performed, without any

programming. It is advised that each door channel

be tested to ensure proper operation of the reader,

the door contact and the request to exit devices.

1. From the CMD prompt, type in [S], then press

[ENT].

CMD S

2. By pressing [NXT] key you will display the

channel input status for all 4 doors. You can use -

(minus) to go back through each door. Refer to

the table below for further details.

1= DC RT 1

Channel 1 status. Press [NXT] to go to channel

2= DC RT 1

Channel 2 status. Press [NXT] to go to channel

3= DC RT 1

Channel 3 status. Press [NXT] to go to channel

4= DC RT 1

Press [NXT] to continue.

Table 19: Input Physical State Codes

Indicates the Channel Number

Displays when the door contact circuit (DR1) is

closed.

Displays when the Request to Exit device (DR2)

is activated.

1(2)

Displays when a key/card is presented to a

reader. (2 will display when key/card presented

to an EXIT reader).

3. This shows you how many events are currently

in the High Priority (HI) list and how many in

the Low Priority (LO) list

TRAN HI00 L00000

Press [NXT] to continue.

4. This show you the status of the controllers. Refer

to the table below for further details.

CTS OVRD TAMP @

Table 20: Display Status

CTS if CTS displays, the serial port CTS signal is high.

OVRD If OVRD displays, the terminals F+ and F- are

closed, emergency override active.

TAMP If TAMP displays, the terminals T+ and T- are

closed, case tamper active.

@ this character represents the last command

received from the PC or CNC. You may see ? or

/ at times.

End of section. Press [ESC] to exit to the CMD

prompt.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 59 60

Comentarios a estos manuales

Sin comentarios

Bosch K2200 Series Guía de instalación Pagina 44

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch K2200 Series