Bosch K2200 Series Guía de instalación descargar pdf (Pagina 7)

K2200 Series | Installation Guide | 2.0 K2200 Series Controllers EN | 7

Bosch Security Systems | 7/03 | 17375 1.3 / 46513C

2.0 K2200 Series Controllers

This section provides a brief introduction to the

Readykey K2200 Series Controllers. In it, the user is

shown:

• The different controllers in the series and what

each does.

• Compatibility with older Readykey products.

• What features are provided on each controller.

Please read this document even if you are

familiar with previous Readykey products.

There is a great deal of new information

contained in this document that should

make installation and testing a lot easier.

You are also advised to attend a

Readykey Training Course before

attempting installation

2.1 What is the Readykey K2200 Series

of Controllers?

2.1.1 Introduction

The Readykey K2200 Series Controllers are the

successors to the Readykey K2100 Series Controllers.

Although all the controllers can operate in standalone

mode they are primarily designed to be a part of a

larger system administered by Readykey for

Windows. This provides easy access to all the new

features with configuration carried out mainly at the

administration PC.

The controllers will form part of a Readykey Access

Control System and it is important that, when

installing these controllers, you are aware of the

whole system and how it is to be administered.

2.1.2 Controllers in the Series

There are two main variants of the Readykey K2200

series. These are described in detail later in this

section but briefly they are:

1. Readykey K2200 Multi-Function Door

Controller. This is a replacement for the

Readykey K2100 with support for four alarm

event managers and four doors. It is available

with or without a faceplate.

2. Readykey K1200 Multi-Function Door

Controller. This is a replacement for the

Readykey K1100 with support for two alarm

event managers and two doors. It is available

with or without a faceplate.

2.2 Multi-Function Door Controller

2.2.1 Background

Most Readykey access control systems, very simply,

consist of eight distinct parts:

1. The ID Device is presented to (or swiped

through) the reader to open a door. This has a

unique code which identifies it to the system.

2. The Reader, usually fitted close to the door,

detects the unique code in the ID device and

sends it to the door controller for verification.

There are several types of reader available,

suitable for different purposes and environments.

It is usually situated close to the door.

3. The Request to Exit (RTE) Switch is used to

open a door from the secure side (sometimes a

reader is used on each side of the door). When

the switch is pressed a signal is sent to the

controller to release the lock and open the door.

4. The Controller is the heart of the access control

system. It compares the unique code in the ID

Device with the information stored in its memory

and, if the ID Device is valid, it activates the lock

to open the door.

5. The PSU(s) powers the controller and locks.

6. The Lock secures the door and is released when

a valid ID Device is presented to the reader.

Locks can be divided into two main types:

• Fail Safe - continuously powered with power

removed to unlock. If power fails the door

will open.

• Fail Secure - Power supplied to unlock.

7. The Administration System is used to administer

the system - program into the system who goes

where and when. This may be built into the

controller or be on a separate PC.

8. The wiring between the various components

(above 1-7).

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Comentarios a estos manuales

Sin comentarios

Bosch K2200 Series Guía de instalación Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch K2200 Series