Bosch K2200 Series Guía de instalación descargar pdf (Pagina 25)

K2200 Series | Installation Guide | 5.0 Installation Details EN | 25

Bosch Security Systems | 7/03 | 17375 1.3 / 46513C

Figure 12: Metal Case

5.3.2 Faceplate

The faceplate is secured by two tabs that fit into slots

in the power supply on the left-hand side of the

baseplate and by two spring clips on the right-hand

side that attach to the baseplate. The ribbon

connector should be plugged into the socket on the

circuit board at the top right of the board.

The door controller fits in the metal case using two

slots that fit over tabs on the back of the case. You

should ease the tabs on the case forward slightly to

make locating the door controller easier. The base

plate should then be secured using the single tab at

the bottom of the baseplate using the self-tapping

screw supplied.

5.3.3 Fitting Direct to a Flat Surface

You may wish to fit the door controller in an

enclosure or cabinet other than one of the standard

metal cases.

Figure 13 indicates the position of screw slots and

cable entry holes on the door controller.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Sin comentarios

Bosch K2200 Series Guía de instalación Pagina 25