Bosch B450 Guía de instalación descargar pdf (Pagina 82)

3. Enter [9 6 0] and press [AWAY] to exit from Installer’s Programming Mode. Two beeps

sound and the STAY and AWAY indicators are extinguished. The system returns to the

disarmed state.

4. Or skipping steps 1 - 3, with a text codepad, enter the installer code and press [AWAY] to

enter Installer's Programming Mode, go to menu 747 Set Up Domestic Dialing Format,

then exit with saving.

5. To program your telephone numbers, enter your Master Code and press [2][AWAY]. Three

beeps sound and the STAY and AWAY indicators flash. There are 4 telephone number

locations. Numbers 1 and 2 are for receiver 1. Numbers 3 and 4 are for receiver 2. After

the [965] command, the receiver 1 format is domestic and receiver 2 format is contact ID.

Press [1] to view and set/modify telephone number 1 followed by [AWAY] to complete

the process. If you still want to set telephone number 2, you will have to enter Master

Code and press [2][AWAY], then press [2] to select number 2. If any telephone numbers

are already programmed, they are displayed one digit at a time using the codepad

indicators. If no telephone numbers are programmed, two additional beeps sound after

you enter this mode. These two beeps normally sound after the last digit of the last

phone number is displayed.

6. Enter the digits for telephone number 1, one digit at a time. As you enter each digit, the

corresponding codepad indicator lights. If using a text codepad, the programmed number

and new entered number are displayed.

7. After the last digit of the telephone number, press [AWAY] to exit from this mode.

Digit Required

Number to Program Digit Required Nuber to Program

0 0 8 8

1 1 9 9

2 2

3 3 * [STAY]1

4 4 # [STAY]2

5 5 4 sec pause [STAY]3

6 6

7 7 terminator [STAY]5

Table 8.1: Domestic Dialing Digits

Example

To program telephone numbers (96721777-primary and 96721233-backup) for receiver 1,

enter the following sequence:

[2 5 8 0 2][AWAY][1][AWAY][9 6 7 2 1 7 7 7][AWAY][2 5 8 0 2][AWAY][2][AWAY] [4 9 6 7 21 2

3 3][AWAY]

You can cancel domestic dialing at any time (for example, you are moving and do not want the

system to continue calling your work place or mobile phone).

To disable domestic dialing:

Enter your Master Code and press [2][AWAY] [1][STAY][5][AWAY]. Once the primary number

is disabled, the secondary number will be unavailable also.

1. Repeat Step 4-5 for each additional phone number.

en | Domestic Dialing Control Panel

2014.07 | 00n | F01U298026 Installation Guide

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 151 152

Comentarios a estos manuales

Sin comentarios

Bosch B450 Guía de instalación Pagina 82

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch B450