Bosch B450 Guía de instalación Pagina 97
- Pagina / 152
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Swinger Shutdown Count for Siren
Location 379
Default 3
1 to 15 Number of times siren operates until lockout
Location 379 determines the number of times the sirens can be activated before lockout
options take effect. This location has no effect unless you program at least one zone for
lockout siren. Refer to Zone Options 1, page 93 for more information.
Only alarms activated from zone inputs can increment the Swinger Shutdown Counter. Alarms
such as Codepad Panic, Access Denied, and other system alarms do not affect the Swinger
Shutdown Count.
Lockout Siren is separate for each zone, If a zone's siren is locked out, another zone's siren
can still be activated.
Example
Zone1 and 2 are programmed for Lockout Siren with a Swinger Shutdown Count of 2. If Zone
1 activates an alarm, the Swinger Shutdown Count is incremented by one after the end of
Siren Run Time from 0 to a swinger shutdown count of 1.
After the Siren Run Time is reset from the previous alarm, Zone 2 activates an alarm and
activates the sirens. After the sirens are reset, the swinger shutdown count is incremented
again to 1 and the swinger shutdown count for Zone1 is still 1.
If Zone 1 activates an alarm again after the sirens are reset from Zone 2, the Swinger
Shutdown Count is incremented to 2, which locks out Zone 1 only from sounding the sirens
until the system is reset, armed or disarmed.
At this point, Zone 1’s Swinger Shutdown Count for Sirens is reset to 0.
Swinger Shutdown Count for Report
Location 380
Default 6
1 to 15 Number of times the report operates until lockout
Location 380 determines the number of times the report can be activated before lockout
options take effect. This location has no effect unless you program at least one zone for
lockout report. Refer to Zone Options 1, page 93 for more information.
Only alarms activated from zone inputs can decrement the Swinger Shutdown Counter. Alarms
such as Codepad Panic, Code Retries, and other system alarms do not affect the Swinger
Shutdown Count.
Lockout Report is separate for each zone. If a zone's report is locked out, another zone's
report can still be activated. Each zone has a standalone Swinger Shutdown Count for Report.
This counter increases by 1 when a zone activates a system sound alarm from no sound alarm
state.
Use Location 492 to set smart lockout. When a zone report is locked out, if smart lockout is
enabled, lockout events on this zone are not reported if no alarm is sounding. If an alarm is
ongoing, events are reported as configured.
9.4
9.5
Control Panel Zone Information | en 97
Installation Guide 2014.07 | 00n | F01U298026
- Control Panel 1
- Table of contents 3
- Introduction 8
- System Overview 10
- ICP-SOL3-P 12
- Configuration and Parts 13
- Parts list 14
- Order separately 14
- Installation workflow 15
- Accessories 16
- + 17
- PWR A B COM 17
- PWR A B COM 17
- Icon Codepad Indicators 18
- Text Codepad Indicators 19
- Installer Menu 23
- RADION keyfobs 27
- Keyswitches 27
- B308 Octo-output Module 28
- WE800EV2 29
- Figure 4.1: 31
- Figure 4.2: 31
- Figure 4.3: 31
- Accessories 31
- B426 -1 B450-2 35
- SwitcherRouter 35
- Internet 35
- Accessories 37
- TF008 Plug Pack (TF008-B) 40
- Remote Security Control 40
- Configuration 42
- Disable Factory Defaults 46
- Configuring for email 47
- System Operations 52
- Standard isolating 57
- Code to isolate 57
- Fault analysis mode 58
- Fault descriptions 59
- System Functions 62
- Change Domestic Phone Numbers 64
- Walk Test Mode 68
- Event Memory Recall Mode 68
- Master Code Functions 69
- Deleting User/Radio Codes 71
- Turning Outputs On and Off 75
- Setting the Date and Time 75
- User Code Functions 77
- Hold-Down Functions 77
- Send Test Report 80
- Domestic Dialing 81
- Zone Information 83
- EOL Resistor Value 84
- Zone Programming 85
- Zone Defaults 86
- Zone Types 90
- Zone Information 91
- Zone Pulse Count 92
- Zone Pulse Count Time 92
- Zone Options 1 93
- Zone Options 2 94
- Zone Report Options 95
- Keyswitch Zone Options 95
- Z1 COM Z2 96
- System Status Programming 98
- Test Reporting Options 99
- System Event Timers 101
- Auto Arming Time 104
- Auto Disarming Time 104
- Kiss-Off Wait Time 105
- Speaker Beep Volume 105
- System and Consumer Options 106
- System Options 3 107
- System Options 4 108
- Consumer Options 1 108
- Consumer Options 2 109
- Consumer Options 3 110
- Partitioning 111
- Zone allocations 112
- User code area assignments 113
- Codepad assignment 113
- Communicator Information 114
- Telco Arming Sequence 116
- Telephone Line Fail Options 118
- Communicator Options 1 119
- Communicator Options 2 120
- Communicator Options 3 121
- A-Link Options 121
- Installer Code 124
- User Codes 124
- Control Panel Access 125
- User Code Priority 126
- Control Panel Access 127
- Programmable Outputs 128
- Output Event Types 132
- Programmable Outputs 133
- Programmable Outputs 135
- Output Polarity 138
- Programmable Outputs 139
- RF Information 141
- Low Battery Restore Report 145
- Fault String 146
- Event String 147
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch B450
Los Sistemas De Control De Acceso De Seguridad Bosch LTC 4600 Series Manual de instrucciones
(20 paginas)
(20 paginas)
Los Sistemas De Control De Acceso De Seguridad Bosch AMAX panel 4000 EN Guía de instalación
(176 paginas)
(176 paginas)
Los Sistemas De Control De Acceso De Seguridad Bosch LTC 8016/90 Manual de instrucciones
(24 paginas)
(24 paginas)
(96 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.057 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales