Bosch TOURING 7500 SERIES Manual del operador descargar pdf (Pagina 168)

emulation helps to exchange existing Allegiant devices with Bosch Video Management System

or to use Bosch Video Management System with applications that support the Allegiant CCL

commands.

Allegiant CCL commands supported in Bosch VMS lists the CCL commands supported in

Bosch Video Management System.

Note:

Do not configure the Allegiant CCL emulation and an Allegiant device to the same COM port. If

for both devices the same COM port is configured, the Allegiant device wins. The access of the

Allegiant CCL emulation device fails with an appropriate message.

To solve this, the Management Server must have two different COM ports or connect the

Allegiant device to another computer.

Enable Allegiant CCL Emulation

Select the check box to enable the emulation.

Baud rate

Select the value for the transmission rate in bit/s.

Stop bits

Select the number of stop bits per character.

Parity check

Select the type of parity check.

Interface mode

Select the desired protocol for the serial interface.

Half-duplex mode

Select the setting appropriate for your application.

Mobile Video Service page

Main window > Devices >

Allows you to add one or more transcoding service entries to your Bosch VMS. This

transcoding service adapts the video stream from a camera configured in Bosch VMS to the

available network bandwidth. This enables mobile video clients like an iPhone, iPad or Web

Client to receive live or playback video data via unreliable network connections with limited

bandwidth.

Sin comentarios

Bosch TOURING 7500 SERIES Manual del operador Pagina 168