Bosch TOURING 7500 SERIES Manual del operador Pagina 36
- Pagina / 260
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
RS232 adapter Serial interface of a VIP XD decoder
4
5 GND
6
7 CTS
8 RTS
9
The following illustration shows the pinout of a standard RS232 adapter (1) and the pinout of
the decoder’s serial adapter (2):
21
12345
6789
Updating Bosch IntuiKey keyboard firmware
1. On any PC, install the IntuiKey downloader.
2. Start IntuiKey Firmware Upgrade Utility.
3. Connect the keyboard with a valid serial cable (refer to Bosch Support if such a cable is
not available) to this PC.
4. On the keyboard, press Keyboard Control softkey, then Firmware Upgrade.
5. Enter the password: 0 and 1 simultaneously.
The keyboard is in bootloader mode.
6. On the PC, click Browse to select the firmware file: for example kbd.s20
7. Set the COM port.
8. Click the Download button to download the firmware.
On the keyboard display, Programming is displayed.
Do not press the Clr key now. Otherwise the keyboard is not usable after restart (see
Notice below).
9. Click Browse to select the language: for example 8900_EN_..82.s20
On the keyboard display, Programming is displayed.
10. Close IntuiKey Firmware Upgrade Utility.
11. On the keyboard, press Clr key to exit.
The keyboard restarts. Wait some seconds until the menu for selecting the keyboard
language appears.
12. Select the desired language with a softkey.
The default start display appears.
5.2.3
36 en | Supported hardware Bosch Video Management System
2013.07 | V1 | Configuration Client Configuration Manual Bosch Sicherheitssysteme GmbH
- Bosch Video Management System 1
- Table of contents 3
- Using the Help 12
- Printing the Help 13
- Introduction 14
- Introduction 15
- System overview 17
- System overview 19
- Concepts 20
- Management Server 21
- Operator Client 21
- Configuration Client 21
- IP camera / encoder 21
- Enterprise Management Server 21
- Permissions 23
- Server Lookup 24
- Remote access 25
- Alarm handling 28
- Concepts 29
- DVR devices 30
- Mobile Video Service 30
- BVIP devices 31
- Supported hardware 32
- Installing hardware 33
- Management System 37
- Switching/Sequence 43
- Getting started 44
- Network settings page 46
- Time settings page 47
- Add storage page 52
- Activate Configuration page 54
- Adding a new license 58
- Working offline 58
- Related Topics 60
- – Enterprise System, page 20 60
- – Server List page, page 143 60
- – User Groups page, page 229 60
- Configuring Server Lookup 61
- Managing VRM storage 62
- Adding a VRM pool 63
- Configuring an iSCSI device 64
- Adding a LUN 65
- Formatting a LUN 66
- Managing encoders 67
- Moving a VSG to another pool 72
- Configuring multicast for VSG 74
- Switching on VSG recording 74
- Managing NVRs 75
- Configuring NVRs 76
- Configuring a Primary NVR 77
- Managing various devices 81
- Adding a VIDOS NVR 84
- Adding a monitor wall 88
- Configuring the structure 92
- Managing resource files 93
- Adding a Command Script 94
- Adding a camera sequence 95
- Assigning a map to a folder 97
- Managing devices on a map 97
- Adding a document 98
- Configuring schedules 99
- Removing a Task Schedule 101
- Renaming a schedule 102
- Copying and pasting in tables 103
- Configuring camera properties 104
- Configuring PTZ port settings 107
- Configuring events and alarms 108
- Creating a Compound Event 111
- Configuring an alarm 112
- Editing a Compound Event 112
- Configuring Command Scripts 114
- Creating a user 117
- Creating a group or account 118
- Configuring LDAP settings 119
- Associating an LDAP group 120
- Managing configuration data 125
- Configuration examples 128
- Adding a Bosch ATM/POS bridge 131
- Configuration window 135
- Menu commands 136
- Activation Manager dialog box 137
- Alarm Settings dialog box 139
- Options dialog box 140
- Show Port Mapping dialog box 141
- Devices page 142
- Server List page 143
- Set IP Addresses dialog box 145
- Set Display Names dialog box 145
- Global Settings page 146
- Disk Storage page 146
- Camera Storage page 147
- Assigned NVRs page 148
- Assigned NVR page 148
- Vidos NVRs page 149
- DiBos page 150
- Matrix Switches page 152
- Outputs page 153
- Inputs page 153
- Workstation page 154
- Decoders page 155
- Devices page 157
- Analog Monitor Groups page 158
- Advanced Configuration page 159
- Monitor Wall page 160
- Communication Devices page 160
- Send Test E-mail dialog box 162
- POS + ATM page 163
- Virtual Inputs page 164
- SNMP page 164
- Assign Keyboard page 166
- I/O Modules page 167
- Allegiant CCL Emulation page 167
- Mobile Video Service page 168
- VRM Devices page 169
- VRM Settings page 169
- Pool page 170
- Devices page 173
- Basic Configuration page 175
- Load Balancing page 176
- LUNs page 177
- Add LUN dialog box 178
- 23.27.10 178
- Table 23.1: Protocol settings 180
- Live Only page 181
- Local Storage page 182
- Encoders / Decoders page 183
- Date/Time page 184
- Video Input page 184
- Installer Menu 187
- Picture Settings 187
- Recording Management page 188
- Recording preferences page 188
- VCA page 189
- Select Area dialog box 190
- Audio Alarm page 191
- Privacy Masks page 192
- Camera page 192
- Mode page 194
- Lens page 196
- PTZ page 197
- Prepositions and Tours page 197
- Relay page 199
- Periphery page 200
- Network Access page 200
- Advanced page 202
- Multicast page 203
- FTP Posting page 204
- IP v4 Filter 204
- Licenses page 205
- Decoder page 205
- Delete decoder logo 206
- Maps and Structure page 207
- Resource Manager dialog box 208
- Select Resource dialog box 208
- Sequence Builder dialog box 209
- Add Sequence dialog box 209
- Schedules page 211
- Cameras and Recording page 213
- Storage) 215
- PTZ Settings dialog box 218
- Events page 220
- Select Devices dialog box 223
- Alarms page 224
- Alarm Options dialog box 226
- Alarms page 227
- User Groups page 229
- Table 30.1: User groups 230
- User Group Properties page 231
- User Properties page 232
- Logon Pair Properties page 233
- Select User Groups dialog box 233
- Camera Permissions page 234
- Control Priorities 235
- User Groups page 237
- Credentials page 238
- Logical Tree page 239
- Operator Features page 239
- Priorities page 241
- User Interface page 241
- Server Access page 242
- Troubleshooting 244
- Glossary 247
- Glossary 251
Relacionado con productos y manuales para Grabadores de vídeo digital (dvr) Bosch TOURING 7500 SERIES
(26 paginas)
(202 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.041 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales