Bosch TOURING 7500 SERIES Manual del operador descargar pdf (Pagina 87)

You configure a Command Script to be started when the Operator Client on the selected

workstation is started.

You must create a corresponding Command Script.

For creating a Command Script, see Managing Command Scripts, page 114.

To configure a startup script:

4 In the Startup script: list, select the required Command Script.

Changing the network address of a workstation

Main window > Devices > Expand

To change the IP address:

1. Right-click

and click Change Network Address.

The Change Network Address dialog box is displayed.

2. Change the entry in the field according to your requirements.

Enabling Forensic Search on a workstation

Main window > Devices > Expand > > Settings page

You must enable Forensic Search on a workstation.

Note:

Enable video content analysis on each encoder. Use the VCA page of the encoder in the Device

Tree.

To enable Forensic Search:

4 Click to select the Enable Forensic Search check box.

Assigning an analog monitor group to a workstation

Main window > Devices > Expand > > Analog Monitor Groups page

You assign an analog monitor group to a Bosch VMS workstation. In the Options dialog box,

you can configure that all workstations can control analog monitor groups regardless of the

setting here.

To assign an analog monitor group:

4 In the Assigned Analog Monitor Groups column, select the check box.

Configuring an analog monitor group

Main window > Devices > Expand >

Caution!

You cannot control an analog monitor group from within Operator Client when the connection

to the Management Server is lost or when Operator Client with Enterprise System is used.

13.8

13.9

13.10

13.11

Bosch Video Management System Managing various devices | en 87

Bosch Sicherheitssysteme GmbH Configuration Manual 2013.07 | V1 | Configuration Client

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 259 260

Sin comentarios

Bosch TOURING 7500 SERIES Manual del operador Pagina 87