Bosch TOURING 7500 SERIES Manual del operador descargar pdf (Pagina 75)

Managing NVRs

Main window > Devices

This chapter provides information on how to configure the devices in your system.

Changing the Device Tree impacts other pages of the Configuration Client:

– Maps and Structure

With the devices of the Device Tree you create a user defined structure called Logical

Tree. Hence, if you remove a device from the Device Tree, this device is automatically

removed from the Logical Tree. But adding a device to the Device Tree does not add this

device to the Logical Tree.

– Cameras and Recording

All cameras of the Device Tree are available in the Camera Table and the Recording

Tables. You cannot modify DiBos or Bosch Allegiant cameras.

– Events

All devices of the Device Tree are available in the corresponding Event Tables.

– User Groups

You can reduce the functional range of the devices on several permission pages (per user

group or Enterprise Account).

1. Click

to save the settings.

2. Click

to undo the last setting.

3. Click to activate the configuration.

Adding NVRs, their recorded encoders, and decoders

Main window > Devices > NVR & Decoder Scan > NVR & Decoder Scan dialog

box

You scan the network to detect the following devices:

– NVRs

– Decoders

– Encoders

The system automatically adds a default analog monitor group with the detected decoders

assigned. This analog monitor group is added below .

When you scan the network for the first time, NVRs and decoders are automatically assigned

to the system.

You must manually assign detected encoders to NVRs.

To avoid conflicts with duplicate IP addresses you start the initial device scan. This is useful

when you integrate new devices in your network which have duplicate IP addresses or the

factory default IP address (192.168.0.1). You cannot perform this initial device scan

successfully with devices that are password protected.

12.1

Bosch Video Management System Managing NVRs | en 75

Bosch Sicherheitssysteme GmbH Configuration Manual 2013.07 | V1 | Configuration Client

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 259 260

Sin comentarios

Bosch TOURING 7500 SERIES Manual del operador Pagina 75