
1 Firewall 6 IP camera / encoder
2 Router
Port forwarding
7 Enterprise Management Server
Enterprise server list
3 Management Server
Port mapping
8 Decoder
4 Operator Client
Logon to
9 DynDNS Server
Dynamic naming
5 Configuration Client
Logon to
10 World Wide Web
To enable the remote access of an Operator Client to devices in a remote network, each
device is assigned a public port number in addition to the public network address of the
router. For access, Operator Client uses this public port number together with the public
network address. In the private network the incoming traffic for the public port number is
forwarded to the private network address and port number of the corresponding device.
You configure the port mapping in Configuration Client for use by Operator Client.
Notice!
Additionally the network administrator must configure the port forwarding on the router of
the private network. The network administrator must ensure that remote access via these
ports is running outside of Bosch VMS environment.
Bosch Video Management System Concepts | en 27
Bosch Sicherheitssysteme GmbH Configuration Manual 2013.07 | V1 | Configuration Client
Comentarios a estos manuales