Bosch DS7445i Guía de usuario Pagina 20
- Pagina / 54
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Page 20 P/N: 49211C © 2002 Detection Systems, Inc. All rights reserved. DS7240/DS7220 User's Guide
PART II: KEYPAD USER’S GUIDE: DS7447i LCD KEYPAD
The strobe output is tested next. This test resets
after approximately 20 minutes, or when the [*]
key is pressed.
Testing Strobe.
Press * to end.
Check for strobe activation.
The backup battery is tested next. This test may
take up to 4 minutes.
Testing battery.
May take 4 min.
The keypad displays the results of the battery
test:
Battery Test
Passed.
OR
Battery Test
Failed!
Please call for
Service.
Finally, the phone connection is tested. This test
may take up to 10 minutes:
Testing Phone.
May take 10 min.
The keypad displays the results of the phone line
test:
Phone Test
Passed.
OR
Phone Test
Failed!
Please check for
dial tone.
4. When the test is complete, the system returns to
the normal display.
To stop the test currently in progress and skip to
the next test, press the [*] key. To abort all
system tests and return to the normal display,
press the [#] key.
4.25 Walk Test
I can perform this function.
I cannot perform this function.
Key Sequence: [#] + [4] + [4]
Description
Use this function to walk-test detection devices
connected to your system. Perform the Walk Test
on a weekly basis.
Your Security Company configures the types of
devices that can be walk-tested.
Procedure
1. Make sure that the system is turned off (Armed
LED is off).
2. Enter a valid user PIN.
3. Enter [#] + [4] + [4]. The system starts the Walk
Test.
The keypad scrolls all zones that need to be
tested (zones scroll one at a time). To
successfully test each zone, you need to trigger
the corresponding detection device (open a door,
walk in front of a motion detector, etc.).
Zn2 Un-Tested
Front Door
Zn3 Un-Tested
Hallway
Zn4 Un-Tested
Living Room
To stop test
Press #
You may press the [#] key to stop the Walk Test.
Test fire detection devices (smoke/heat
detectors) weekly as instructed by your
Security Company and in accordance with the
devices’ instructions.
- User’s Guide for the 1
- MY ALARM COMPANY IS: 2
- Contents 3
- Part I: Introduction 4
- 3.0 Keypad Overview 5
- 3.2 Keypad Tones 6
- 3.3 Keypad LED Functions 6
- 3.4 Function Key Sequences 7
- 3.5 System Events 7
- 3.8 Logging Out of the System 7
- Part II: Keypad User’s Guide 8
- 4.7 Set Partial On Zones 10
- 4.10 Force Arming the System 12
- 4.11 View Faulted Zones 13
- 4.12 Bypass Zones 13
- 4.13 Date and Time 14
- 4.14 Change PIN 14
- 4.15 Change Others’ PINs 15
- 4.17 Add a PIN 16
- 4.18 Delete a PIN 17
- 4.19 Renew One-Time PINs 17
- 4.20 Check System Troubles 18
- 4.21 View Alarm Memory 18
- 4.22 View System Trouble 19
- 4.23 View Zone Trouble 19
- 4.24 System Test 19
- 4.25 Walk Test 20
- 4.26 Reset the System 21
- 4.27 Turn Chime On/Off 21
- 4.28 Select Chime Tone 21
- 4.29 Select Chime Zones 22
- 4.30 Extend Auto-On Time 22
- 4.31 Change Skeds 22
- 4.32 Change Outputs 25
- 4.33 Remote Program 26
- 4.34 All Areas Off 26
- 4.35 All Areas On 26
- 4.36 Move to Area 27
- 4.37 Auto-Forward On Setup 27
- 4.38 Auto-Forward Off Setup 28
- 4.39 Auto-Forward On/Off 28
- 4.41 View Log 29
- 5.1 Silence Alarms 30
- 5.2 Keypad Adjust 30
- 5.3 Turn the System Off 30
- 5.4 Turn the System All On 31
- 5.7 Set Partial On Zones 32
- Flashing Armed LED 33
- 5.10 Force Arming the System 34
- 5.11 Bypass Zones 35
- 5.12 Date and Time 35
- I can perform this function 36
- 5.17 Delete a PIN 39
- 5.18 Renew One-Time PINs 39
- 5.19 Check System Troubles 40
- 5.20 View Alarm Memory 40
- 5.21 View System Trouble 40
- 5.22 View Zone Trouble 41
- 5.23 System Test 41
- 5.24 Walk Test 42
- 5.25 Reset the System 42
- 5.26 Turn Chime On/Off 42
- 5.29 Extend Auto On Time 44
- 5.30 All Areas On 44
- 5.31 All Areas Off 44
- 5.32 Auto Forward On/Off 44
- 5.34 Remote Program 45
- Part III: Reference Materials 46
- 7.0 Panel Event Descriptions 47
- 10.0 Maintenance and Service 52
- 11.0 Power Failure 52
- 12.0 How to Clean the Keypad 52
- 13.0 Glossary 53
- Detection Systems, Inc. 6/02 54
- P/N: 49211C Page 54 of 54 54
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch DS7445i
(44 paginas)
Los Sistemas De Control De Acceso De Seguridad Bosch APC-AMC2-4WCF Manual de instalación
(62 paginas)
(62 paginas)
Los Sistemas De Control De Acceso De Seguridad Bosch AutoDome 600 Series Manual de usuario
(11 paginas)
(11 paginas)
(8 paginas)
(64 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.601 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales