Bosch DS7445i Guía de usuario Pagina 48
- Pagina / 54
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Page 48 P/N: 49211C © 2002 Detection Systems, Inc. All rights reserved. DS7240/DS7220 User's Guide
PART III: REFERENCE MATERIALS
Event
#
Event Description Event
#
Event Description
41
ChckSum Fail,
Dbus
Checksum on Data Bus device
parameters failed. Contact Security
Company.
61 Frc, All, -Dly, Usr
System forced All On with no delay (instant)
by user.
42 Cls, All, +Dly, Skd System turned All On with Entry
Delay by Sked.
62 Frc, Prt, +Dly, Skd System forced Perimeter On with Entry Delay
by Sked.
43 Cls, All, +Dly, KS
System turned All On with Entry
Delay by keyswitch.
63 Frc, Prt, +Dly, KS
System forced Perimeter On with Entry Delay
by keyswitch.
44 Cls, All, +Dly,
RPS
System turned All On with Entry
Delay by DS-RPS.
64 Frc, Prt, +Dly, RPS System forced Perimeter On with Entry Delay
by DS-RPS.
45 Cls, All, +Dly, Tel System turned All On with Entry
Delay by telephone.
65 Frc, Prt, +Dly, Usr System forced Perimeter On with Entry Delay
by user.
46 Cls, All, +Dly, Usr System turned All On with Entry
Delay by user.
66 Frc, Prt, -Dly, RPS System forced Perimeter On with no delay
(instant) by DS-RPS.
47 Cls, All, -Dly, RPS System turned All On with no delay
(instant) by DS-RPS.
67 Frc, Prt, -Dly, Usr System forced Perimeter On with no delay
(instant) by user.
48 Cls, All, -Dly, Usr
System turned All On with no delay
(instant) by user.
68 Reserved.
49 Cls, Prt, +Dly, Skd System turned Perimeter On with
Entry Delay by Sked.
69 CommFail Report failed to reach routing destination.
50 Cls, Prt, +Dly, KS
System turned Perimeter On with
Entry Delay by keyswitch.
70
Comm Fail,
AltComm
Report failed to reach routing destination
configured for Alternate Communication.
51 Cls, Prt, +Dly,
RPS
System turned Perimeter On with
Entry Delay by DS-RPS.
71 Comm Restoral After communication fail, report sent
successfully to routing destination.
52 Cls, Prt, +Dly, Usr System turned Perimeter On with
Entry Delay by user.
72 Comm Rstl,
AltComm
After communication fail, report sent
successfully to routing destination configured
for Alternate Communication.
53 Cls, Prt, -Dly,
RPS
System turned Perimeter On with
no delay (instant) by DS-RPS.
73 Date/Time Change Date/Time in panel changed.
54 Cls, Prt, -Dly, Usr
System turned Perimeter On with
no delay (instant) by user.
74 Duress
User entered Duress PIN or pressed Panic
key sequence on RF keyfob.
55 Frc, All, +Dly, Skd System forced All On with Entry
Delay by Sked.
75 Fire, Alarm Alarm event on fire detection device(s).
56 Frc, All, +Dly, KS System forced All On with Entry
Delay by keyswitch.
76 Fire, Cross Verified alarm event on fire detection
device(s) with Cross Zone option.
57
Frc, All, +Dly,
RPS
System forced All On with Entry
Delay by DS-RPS.
77 Fire, Unverified
Unverified alarm event on fire detection
device(s) with Cross Zone option.
58 Frc, All, +Dly, Tel System forced All On with Entry
Delay by telephone.
78 Fire, Missing Fire detection device(s) assigned to zone
expander (wired or RF) not responding to
panel’s status poll.
59 Frc, All, +Dly, Usr System forced All On with Entry
Delay by user.
79 Fire, Alrm, Rstl Restoral from alarm, fire detection device(s).
60 Frc, All, -Dly, RPS System forced All On with no delay
(instant) by DS-RPS.
80 Fire, Trouble Trouble condition on fire detection device(s).
Table 18 (cont.): Panel Event Descriptions
- User’s Guide for the 1
- MY ALARM COMPANY IS: 2
- Contents 3
- Part I: Introduction 4
- 3.0 Keypad Overview 5
- 3.2 Keypad Tones 6
- 3.3 Keypad LED Functions 6
- 3.4 Function Key Sequences 7
- 3.5 System Events 7
- 3.8 Logging Out of the System 7
- Part II: Keypad User’s Guide 8
- 4.7 Set Partial On Zones 10
- 4.10 Force Arming the System 12
- 4.11 View Faulted Zones 13
- 4.12 Bypass Zones 13
- 4.13 Date and Time 14
- 4.14 Change PIN 14
- 4.15 Change Others’ PINs 15
- 4.17 Add a PIN 16
- 4.18 Delete a PIN 17
- 4.19 Renew One-Time PINs 17
- 4.20 Check System Troubles 18
- 4.21 View Alarm Memory 18
- 4.22 View System Trouble 19
- 4.23 View Zone Trouble 19
- 4.24 System Test 19
- 4.25 Walk Test 20
- 4.26 Reset the System 21
- 4.27 Turn Chime On/Off 21
- 4.28 Select Chime Tone 21
- 4.29 Select Chime Zones 22
- 4.30 Extend Auto-On Time 22
- 4.31 Change Skeds 22
- 4.32 Change Outputs 25
- 4.33 Remote Program 26
- 4.34 All Areas Off 26
- 4.35 All Areas On 26
- 4.36 Move to Area 27
- 4.37 Auto-Forward On Setup 27
- 4.38 Auto-Forward Off Setup 28
- 4.39 Auto-Forward On/Off 28
- 4.41 View Log 29
- 5.1 Silence Alarms 30
- 5.2 Keypad Adjust 30
- 5.3 Turn the System Off 30
- 5.4 Turn the System All On 31
- 5.7 Set Partial On Zones 32
- Flashing Armed LED 33
- 5.10 Force Arming the System 34
- 5.11 Bypass Zones 35
- 5.12 Date and Time 35
- I can perform this function 36
- 5.17 Delete a PIN 39
- 5.18 Renew One-Time PINs 39
- 5.19 Check System Troubles 40
- 5.20 View Alarm Memory 40
- 5.21 View System Trouble 40
- 5.22 View Zone Trouble 41
- 5.23 System Test 41
- 5.24 Walk Test 42
- 5.25 Reset the System 42
- 5.26 Turn Chime On/Off 42
- 5.29 Extend Auto On Time 44
- 5.30 All Areas On 44
- 5.31 All Areas Off 44
- 5.32 Auto Forward On/Off 44
- 5.34 Remote Program 45
- Part III: Reference Materials 46
- 7.0 Panel Event Descriptions 47
- 10.0 Maintenance and Service 52
- 11.0 Power Failure 52
- 12.0 How to Clean the Keypad 52
- 13.0 Glossary 53
- Detection Systems, Inc. 6/02 54
- P/N: 49211C Page 54 of 54 54
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch DS7445i
(44 paginas)
Los Sistemas De Control De Acceso De Seguridad Bosch APC-AMC2-4WCF Manual de instalación
(62 paginas)
(62 paginas)
Los Sistemas De Control De Acceso De Seguridad Bosch AutoDome 600 Series Manual de usuario
(11 paginas)
(11 paginas)
(8 paginas)
(64 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.031 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales