Bosch DS7445i Guía de usuario descargar pdf (Pagina 32)

PART II: KEYPAD USER’S GUIDE: DS7445i LED KEYPAD

5.6 Turn the System Partial On

I can perform this function.

I cannot perform this function.

Exit Delay Time (to be filled in by your Security

Company):

You have __________ seconds to exit the premises.

Key Sequence: [#] + [3]

Description

Partial On turns on part of your system designated as

Partial On, leaving the rest of the system turned off.

You can select the zones that turn on for Partial On

(see page “Set Partial On Zones”).

Procedure

1. Make sure that Partial On zones are normal (not

faulted). If your system has a faulted zone, you

should return it to normal, or bypass it (see

“Bypass Zones” on page 35).

2. Enter a valid user PIN.

3. Press [#] + [3] to turn the system Partial On.

4. The Armed and Perimeter LEDs turn on and Exit

Delay time starts.

Status

Power

Fire

Supervisory

Bell Silenced

Trouble

TEST WEEKLY

1 2 3 4 5 6 7 8

9 10 11 12

13 14

15 16

Armed and Periemter LEDs ON

Armed Perimeter

During Exit Delay, you may stop the system from

turning on by entering your PIN.

If you wish, you can turn the system Partial On

with No Entry by pressing the [No Entry] key.

During the last 10 seconds of Exit Delay, the

keypad allows for a “last chance” response to

disarm the system. During this time, the keypad

emits a double tone every second. The system

then turns Part On. The Armed and Perimeter

LEDs remain turned on.

5. To turn the system off, enter a valid PIN.

5.7 Set Partial On Zones

I can perform this function.

I cannot perform this function.

Key Sequence: [#] + [6] + [5]

Description

Use this function to select which zones are armed

when you turn the system Partial On. This allows you

to turn part of the system on to detect intrusion, while

the remaining part of the system allows you to move

freely without sounding an alarm.

Procedure

1. Make sure that the system is turned off (Armed

and Perimeter LEDs are off).

2. Enter a valid user PIN.

3. Press [#] + [6] + [5].

4. The keypad indicates which zones are available

for selections. Zone LEDs that are on are already

selected for Partial On, flashing zone LEDs are

available for selection.

Status

Power

Fire

Supervisory

Bell Silenced

Trouble

TEST WEEKLY

1 2 3 4 5 6 7 8

9 10 11 12

13 14

15 16

LEDs ON

Armed Perimeter

LEDs Flashing

5. Enter the Zone Number that you want to activate

or deactivate for Partial On followed by the [∗]

key. Repeat this step until the LEDs for all of the

zones you wish to designate for Partial On

operation are on.

6. Press the [#] key to save your selections and exit

this function.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 53 54

Comentarios a estos manuales

Sin comentarios

Bosch DS7445i Guía de usuario Pagina 32

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch DS7445i