Bosch DS7445i Guía de usuario descargar pdf (Pagina 38)

PART II: KEYPAD USER’S GUIDE: DS7445i LED KEYPAD

5.16 Add a PIN

I can perform this function.

I cannot perform this function.

Key Sequence: [#] + [5] + [6]

Description

Use this function to add new PINs to the system. This

function requires the appropriate authority level to add

PINs. To add a new PIN to the system, you must

assign an area(s) to the new user in addition to using

the other PIN features (changing a PIN and changing

a PIN authority level) as outlined below.

Only use this feature under the direction of your

Security Company.

Procedure

1. Make sure the system is turned Off (Armed LED

is off).

2. Enter a valid user PIN.

3. Enter [#] + [5] + [6].

Zone LEDs 1, 2 and 3 flash (Status LED

continues to flash).

Status

Power

Fire

Supervisory

Bell Silenced

Trouble

TEST WEEKLY

7 8

9 10

11 12 13

14 15

Armed Perimeter

Flashing Status LED

1 2 3 4 5 6

Flashing Zone LEDs

The flashing Zone LEDs represent the selections

you may make by pressing the corresponding

number key.

• 1: To change PINs, press [1].

• 2: To change PIN authority levels, press [2].

• 3: To assign an area to a PIN, press [3].

4. Press [3] to assign an area(s) to the new user.

Zone LEDs 1-16 flash (Status LED continues to

flash).

Status

Power

Fire

Supervisory

Bell Silenced

Trouble

TEST WEEKLY

7 8

9 10 11 12 13

14 15

Armed Perimeter

Flashing Status LED

1 2 3 4 5 6

Zone LEDs 1-16 flash

5. Enter the user number you want to add followed

by the [*] key. For example, to add User 7, press

[7] + [*].

6. Enter the area(s) you want to assign to the new

user by pressing the appropriate numeric key(s)

followed by the [#] key. For example, if User 7 is

to be assigned to Areas 1 and 2, press the [1]

and [2] keys. The corresponding LEDs turn on.

Status

Power

Fire

Supervisory

Bell Silenced

Trouble

TEST WEEKLY

1 2 3 4 5 6 7 8

9 10 11 12

13 14 15

Armed Perimeter

Flashing Status LED

LEDs 1 & 2 ON

7. Press the [#] key to enter your area

assignment(s) into the system. The Zone LEDs

flash.

To remove an area currently assigned to a user,

press the corresponding numeric key. The

appropriate LED turns off. For example, if User 7

is assigned to Areas 1 and 2, but should only be

assigned to Area 1, press the [2] key to remove

Area 2 from User 7’s area assignment.

8. Press the [#] key to return to the three selections

(Zone LEDs 1-3 flash).

9. Press [1] to assign a new PIN. Enter the user

number followed by the [*] key. For example,

enter [7] + [*] to create the PIN for User 7.

10. Enter the new PIN. If the error tone sounds (four

quick beeps), try a different new PIN.

11. Enter the new PIN again for verification.

12. Press the [#] key twice to return to the three

selections (Zone LEDs 1-3 flash).

13. Press [2] to assign a PIN authority level to the

new user.

14. Enter the user number followed by the [*] key.

For example, press [7] + [*] for User 7.

15. Enter the authority level (1-4). Press the [#] key

to enter the assignment into the system.

16. Press the [#] key twice. The keypad emits the OK

tone (one single high-pitched tone). The Status

LED turns off. This indicates that the new user

has successfully been added and that the keypad

has exited this function.

The new user PIN, area assignment and

authority level are automatically logged into

the system’s programming memory. Make

sure that your Security Company’s

programming records are properly updated.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 53 54

Comentarios a estos manuales

Sin comentarios

Bosch DS7445i Guía de usuario Pagina 38

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad Bosch DS7445i